The medical polymer bandage is made of a glass fiber woven base cloth impregnated with moisture-cured polyurethane to form a highly polymerized environmentally friendly substance.
1) Simple operation: Room temperature operation, short time, good molding feature
2) High hardness & light weight
20 times hard than plaster bandage; light material and use less than plaster bandage;
Its weight is plasters 1/5 and its width is plasters 1/3,which could reduce wound burden
3) lacunary (many holes structure) for excellent ventilation
Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus.
4) Rapid ossification (concretion)
It ossifies in 3-5 minutes after open the package and could bear weight after 20 minutes, but plaster bandage need 24 hours for full concretion
5) Excellent X-ray penetration
Good x-ray penetration ability makes X-ray photo clearly without remove the bandage, but plaster bandage need remove to make x-ray inspection.
6) Good waterproofing quality
The moisture -absorbed percent is 85% less than plaster bandage, Even the patient touch the water situation, it still could keep dry in the injury position
7) Convenient operation & mold easily.
8) Comfortable & safe to patient/doctor
Material is friendly to operator and it wont become tension after concretion.
9) Wide application
10) Environment friendly
Material are environmental friendly, which could not produce polluted gas after inflammation.
1. First, put a cotton cover on the fixed part and wrap the cotton.
2. The doctor brings medical gloves.
3. Select the appropriate size bandage to open the package.
4. Soak the bandage at room temperature (21~24°C) for about 4~6 seconds and squeeze it 2~3 times. After taking out, squeeze out too much water. The curing time of the bandage is directly related to the water temperature, the water temperature is high, the curing time is short, and the water temperature is low and the curing time is long. If the water temperature exceeds 27 ° C, the curing time will be shorter.
5. The bandage in the affected part spirally wrapped, wrapped around 1/2~2/3, the tightness of the winding should be moderate, if too loose will weaken the adhesive force of the bandage, too tight will affect the blood circulation of the affected part.
6. The strength of the bandage is related to the number of overlapping layers. According to the actual needs, the non-bearing parts overlap with 3~4 layers, and the load-bearing parts overlap 5~6 layers.
7. When it is necessary to increase the product, it is necessary to ensure the adhesion between the layers of the product. In order to increase the adhesion between the layers of the bandage, the bandage is shaped after winding. The operation time is usually 3~5 minutes. If it is soaked or the operation time is too long, it will affect its adhesion and shaping effect, so it needs to be shaped within the operation time. Within 10 minutes before the product is completely hardened, the affected part cannot move freely.
8. shaping is completed.
Product | Model | Size(WxL, cm) | Package |
Orthopedic casting tape | F2 | 5.0x360 | 10 pieces x 12 boxes/carton |
F3 | 7.5x360 | 10 pieces x 12 boxes/carton | |
F4 | 10x360 | 10 pieces x 12 boxes/carton | |
F5 | 12.5x360 | 10 pieces x 9boxes/carton | |
F6 | 15x360 | 10 pieces x 9 boxes/carton |