HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation
Product Description
Features for the HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation :
Executive Standards: American Heart Association (AHA) 2015 International Cardiopulmonary Resuscitation (CPR) & Cardiovascular Emergency (ECC) Guidelines;
Components: head, torso, nylon carrying bag (single pack), lung bag, mask;
Features:
Simulated airway opening;
Artificial mouth-to-mouth breathing (blowing);
Artificial chest compressions;
Operation cycle: 30 times of presses and 2 times of manual blowing, a total of 30:2 five cycles of CPR operation;
Operating frequency: 100-120 times / minute;
Mode of operation: training;
Cleaning guide:
The simulated human skin and chest skin are made of the same material and can be cleaned by the same cleaning method.
If the item becomes dirty, wash it with soapy water; if it is very dirty, use some household cleaning agents or detergents, such as oil gourd, detergent, etc. It is recommended to use the cleaning agent with the least abrasive product to ensure the skin life.
The dough can be disinfected with a dilute alcohol (do not use a corrosive liquid for soaking). Dilute alcohol can be used for additional safety measures during teaching purposes.
Don't forget to wipe the sterilized upper chest foam part in the same way to keep the simulated interior clean.
Cardiopulmonary resuscitation simulator installation:
1. Gently hook the buckle on the shoulder of the simulator to pull up and open the chest.
2. Attach the head: Place the neck of the head part on the two main axes of the neck of the torso.
3. Folding the lung bag:
There are 4 dotted lines on one side of the lung bag printed on an oval shape;
Please fold the lung bag into 4 folds along the dotted line as shown below.
4. Lift the dummy's chin and lift the head up;
5. Insert the folded lung bag from the mouth;
6. Continue pushing the lung bag into the mouth until it comes out of the neck;
7. Gently pull the extended end out;
8. Place the lung bag on top of the compression (ie the plastic in the center of the foam portion of the torso) to match the ellipse on the lung bag to the plastic position on the torso;
9. Please confirm that the lung bag has been flattened without twists and turns;
10. Fasten the mask to the buttons on both sides of the head;
11. At this point, the torso can be closed and the two buckles on the shoulders can be buckled.
About artificial respiration and chest compressions:
1. Workers can see obvious chest ups and downs when breathing;
2. When the chest compression depth is correct, the impact sound is accompanied;
Components: head, torso, nylon carrying bag (single pack), lung bag, mask;
Features:
Simulated airway opening;
Artificial mouth-to-mouth breathing (blowing);
Artificial chest compressions;
Operation cycle: 30 times of presses and 2 times of manual blowing, a total of 30:2 five cycles of CPR operation;
Operating frequency: 100-120 times / minute;
Mode of operation: training;
Cleaning guide:
The simulated human skin and chest skin are made of the same material and can be cleaned by the same cleaning method.
If the item becomes dirty, wash it with soapy water; if it is very dirty, use some household cleaning agents or detergents, such as oil gourd, detergent, etc. It is recommended to use the cleaning agent with the least abrasive product to ensure the skin life.
The dough can be disinfected with a dilute alcohol (do not use a corrosive liquid for soaking). Dilute alcohol can be used for additional safety measures during teaching purposes.
Don't forget to wipe the sterilized upper chest foam part in the same way to keep the simulated interior clean.
Cardiopulmonary resuscitation simulator installation:
1. Gently hook the buckle on the shoulder of the simulator to pull up and open the chest.
2. Attach the head: Place the neck of the head part on the two main axes of the neck of the torso.
3. Folding the lung bag:
There are 4 dotted lines on one side of the lung bag printed on an oval shape;
Please fold the lung bag into 4 folds along the dotted line as shown below.
4. Lift the dummy's chin and lift the head up;
5. Insert the folded lung bag from the mouth;
6. Continue pushing the lung bag into the mouth until it comes out of the neck;
7. Gently pull the extended end out;
8. Place the lung bag on top of the compression (ie the plastic in the center of the foam portion of the torso) to match the ellipse on the lung bag to the plastic position on the torso;
9. Please confirm that the lung bag has been flattened without twists and turns;
10. Fasten the mask to the buttons on both sides of the head;
11. At this point, the torso can be closed and the two buckles on the shoulders can be buckled.
About artificial respiration and chest compressions:
1. Workers can see obvious chest ups and downs when breathing;
2. When the chest compression depth is correct, the impact sound is accompanied;
Standard configuration:
| 1. A human body model of semi-physical and pulmonary resuscitation; 2. 10 disposable airways; 3. A manual for use; 4. Certificate and warranty card. |
Pictures for HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation :
Packaging & Shipping
Company Information
Our Services
Contact
FAQ
1. How to place order of HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation ?
A: Firstly we confirm product details and then send the Proforma Invoice,
You make payment to us through Alibaba Trade Assurance or T/T, Western Union or MoneyGram,
after we confirm your payment then ship the product to you once finished production.
2. For HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation product, What’s the minimum order quantity (MOQ)?
A: For disposable material,We have our own MOQ,For our HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation our MOQ:1pc,
3. What is your warranty?
A: For most products the warranty is for 12 months, some products we provide 18 months warranty.
For HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation we provide 12 months warranty.
A: Firstly we confirm product details and then send the Proforma Invoice,
You make payment to us through Alibaba Trade Assurance or T/T, Western Union or MoneyGram,
after we confirm your payment then ship the product to you once finished production.
2. For HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation product, What’s the minimum order quantity (MOQ)?
A: For disposable material,We have our own MOQ,For our HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation our MOQ:1pc,
3. What is your warranty?
A: For most products the warranty is for 12 months, some products we provide 18 months warranty.
For HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation we provide 12 months warranty.
4. What’s your delivery time?
A: Generally it is 5 working days if goods in stock. within 10 working days if the goods need production,
And also the delivery time depands on quantity. For HC-S026 High Quality Half Body CPR training manikin, Simple semi-physical and pulmonary resuscitation simulation the delivery time is 10 working days .
5. How to ship the product?
A: The shipping way normally depand on your quantity,total CBM and weight.
We have our own shipping company to provide best shipping cost and efficient way.