1115 High Quality X-ray radiation protective lead gloves/Comfortable Lead Gloves for Radiation Protection

[Product specifications] Default specification: Unisex. [Product use] Protect the human body from radiation [Scope of application] Hospital radiology, school laboratory and nuclear industry environment, etc.

 

 

 

[Product description]

(1) The interior is composed of multi-layer 0.1mmpb-0.125mmbp light and soft lead rubber protective material. The exterior is made of waterproof and wear-resistant nylon cloth. The special lead equivalent can be customized.

(2)   (2) Good protection performance The lead is evenly distributed, the normal use of lead equivalent will not be attenuated; the surface material is wear-resistant and easy to clean.

  [Product Category]

  Radiation protective clothing is the general term for radiation protection series clothing. In practical applications, for the convenience of use, we divide the protective clothing according to the protection area, you can choose according to your needs. In general, the patient uses a five-piece suit, namely a protective cap, a collar, a gonad triangle, a protective towel, a short apron, and the doctor generally chooses according to his or her use requirements.

[Color selection] There are six colors, such as red, blue, green and gray, which are blue by default.

[product packaging] hardcover independent box packaging

 

[Product Inspection] When receiving the product, it should be thoroughly inspected and periodically checked during the application to ensure safety.

[Product Inspection Method]  

 (1) X-ray photography of the product under test at 80Kvp, 3.2mAs, 72 focal length, and then observe the film taken. In the X-ray film, if there are bright spots of different sizes, it means that the material thickness of the part is increased. Large, absorption rays are stronger.

    (2) If a dark spot appears, the table asks for a change in the thickness of the material.

    (3) If the edge of the dark spot area is clear, it may be due to damage to the internal protective material, which is usually caused by the wrong use of the protective clothing.

    (4) If a small amount of dark spots appear, it is produced during the production of protective clothing, such as needle eyes. It has been clinically proven that the dark spot diameter does not exceed 5mm, which will not affect the protective effect. If multiple dark spots larger than 5mm or many small dark spots are found, it should be noted;

    (5) If there is a long shadow, it means that the lead rubber in this part may be broken, mostly due to improper storage of protective clothing.

[product keeper]

(1) This product should not be exposed to sunlight. It should be kept away from heat sources and should not be in contact with paint, acid, alkali or other items that are detrimental to the product.

(2) This product should be stored in a well-ventilated, cool and dry room.