Features:

1) Unique hybrid design, self-priming function, no external air source, easy installation.

2) The water circulation fountain aeration mode is adopted, the liquid and gas are fully mixed, and the oxygen absorption efficiency is high.

3) Low energy consumption, large flow and stable operation.

4) Wear resistant ceramic shaft is adopted, with long service life.

5) Fully sealed motor with live parts is adopted for underwater operation, which is safe and reliable.

6) Immersed in water, low noise.

7) It is suitable for small fish pond, fountain, wave making and oxygen supply

Note:

1. During use, the impeller assembly should be checked and cleaned regularly to prevent the water pump from being blocked by foreign objects.

2. The blockage of foreign objects will directly cause the body of the submersible pump to heat up. At this time, the power supply should be cut off immediately to protect the motor from burning. After the fault is eliminated, the pump can continue to run.

3. The algae grown in the fish pond are easy to adhere to the surface of the pump, and debris such as leaves are also easily adsorbed to the pump to affect the aeration effect. Please pay attention to inspection and cleaning, and the power must be cut off before cleaning.

4. Operating depth range: For details of each model, see the indicated depth in the parameter table. When the operation is less than the minimum diving depth, the aeration and oxygenation performance is greatly reduced. When the operation is greater than the maximum diving depth, the aeration and oxygenation performance due to the increased water pressure. also greatly reduced.

5. In order to prevent electrical plugs and sockets from getting wet by water droplets, the electrical box should be placed in a dry place with a minimum distance of 1.5 meters from the pool, and then set a "water droplet loop" for the power cord connecting the water pump and the socket to prevent Water drips onto the plug or socket.