Automatic carbonated drink filling machine production line packaging specifications

Material: SS304/316

Bottle material

Shape

Filling volume

Filling level(mm)

Neck type

PET/Glass bottle

Square/round/flat bottle

100-2250ml

According request±1mm

As required

Adjustable specifications

Bottle size: bottle diameter≤110mm, bottle height≤340mm

If using square bottles, then bottle separating system will be added

Filling temperature

2℃-40℃ level control: float ball and pneumatic butterfly valve.

Bottle labeling type

Packing system    Min, Spec.

Palletizing system

Manual/ automatic

Hot melt roll-fed

PVC shrink label

Full label/half label

Film shrink packing

Robert packing

Carton packing

2*3 2*4 3*4

3*5 4*4 4*5 4*6 6-30bags/min

Low position

Gantry palletizer

Robot palletizer

User Ambient Conditions

Temperature: 2-40℃, Humidity: no dew

Bottle feed-in

Conveyor with screw for glass bottle

Adopt air-conveyor for PET bottle

Washing Part:

The bottle enters into the rinsing part of three-in-one machine through air conveyor.

The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip. 
After the gripping, the bottle is turned upside down with 180 degree and cantred above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again

Filling part:

Contact-free filling, with all parts in contact with a beverage made from stainless steel AISI 304 / 316L.
 Automatic dummy bottles available, with insertion and removal available for automated CIP.
Optional reduced filler enclosure strengthens food safety and reduces the usage of chemical agents and water during external cleaning.

Capping Part: 

Rotative capping turret, suitable to the application of screw plastic caps on PET bottles 
The fixed part consists of the cap hopper, the cap feeder with relevant motor and the cam actuating the capping heads. 
The heads are raised and lowered by the action of a follower that is riding on a shaped cam.

RO System

Besides Water filling machine, this RO system is very important in the whole water project, we prefer you supply water analysis report from your local inspection department.

This RO system we can make to match up with your water filling machine from capacity from 500L/Hr to 50000L/hr.

This system included sand filter, carbon filter, sodium exchanger, precision filter, Reverse Osmosis, UV, Ozone generator, Ozonized Tower, Pure water tank.

This system is made of SUS304 or SUS316 material, thickness is 2.5mm-3mm we promised.

We use GNP or CNP water pump, USA DOW or HYDRANAUTICS membrane, etc

Blowing Machine with different options:

1. Semiautomatic Blowing Machine for 800BPH-2000bph from  0.2-2.5L bottle  with 2 or 4 cavities.

2. Full automatic blowing machine from 2 cavity, 4 cavity, 6 cavity, 8 cavity, 9 cavity,etc from 2500BPH to 12000BPH for 500ml bottle.

Full automatic sleeve labeling machine

Capacity: 100-350bottles/min can be choosed

Label material: PVC PET OPS,etc

Bottle material: PET PE PP Glass

Bottle Diameter: 28 ~ 120mm

Bottle Height: 15~320mm

Bottle shape: round, square, ellipse, rectangular

Label length: 30~250mm(max)

Label thickness: 0.03~0.13mm

Linear PE film shrink packing machine

Film material: PE  

Shrink membrane thickness: 70~100um

Capacity: 8-35 packages/ min can be chosen

Conveyor belt max width: 600mm

Height : 1000~1100mm