This washing machine is mainly use for the 3,5 gallon barrel filling production line, it can wash the barrel mouth and body, so specially use for mineral water etc.

The barrel is first decapped on the right side and then is put into the left part.

The brushes will remove the stain but will not damage the barrel and printed pattern on the barrel, the special brushes on the

bottom of the barrel. It can not only wash barrel with flat barrel, but also barrel with sunken bottom.

During the process of cleaning. With the aid of detergent, it can clean the stain completely. On the outlet for barrel, the clean

water spraying system will wash away the detergent.

The whole machine has employed an enclosed design, with high reliability and good stability.

 

Main technical parameters :

Material :SUS 304

Air pressure : 0.6MPa

Numbers of brush :8PCS( inside and outside, top and bottom)

Suitable bottle :5 gallon (Φ270×490×56mm)

Output : 80-120 bottles per hour

Dimension : 800x800x1200mm

Power : 1.1kw

Voltage : 380V 50HZ

Weight : 80KG

 

Machine picture: 

 

 

	Semi automatic 5 gallon / 20L PET bottle blow molding machine:   Semi automatic Blowing Machine for 90BPH-180BPH from 5 gallon bottle with one cavity, 5L bottle with 2 cavity can be also used in this blowing machine
80-2000BPH 5 gallon water filling line
	Automatic shrink labeling machine for 5 gallon neck label:   Capacity: 50-100bottles/min can be chosen Label material: PVC PET OPS, etc Bottle material: PET PE PP Glass Bottle Diameter: 28 ~ 120mm Bottle Height: 15~320mm Bottle shape: round, square, ellipse, rectangular Label length: 30~250mm(max) Label thickness: 0.03~0.13mm