Fiberglass Products, buy Hot sell high strength frp fiberglass pultrusion rectangle tube fiberglass pultruded tube on China Suppliers Mobile

Product Details

Product Description

Hot sell high strength frp fiberglass pultrusion rectangle tube fiberglass pultruded tube

Brief Introduction:
We have been working on the production of fiberglass poles and are very professional. And here is a description about fiberglass:

1. Lightweight and strong
The relative density is between 1.5 and 2.0, only 1/4~1/5 of carbon steel, but the tensile strength is close to or even higher
than that of carbon steel, and the specific strength can be compared with high-grade alloy steel.

2. Good corrosion resistance
FRP is a good anti-corrosive material with good resistance to atmospheric, water and general concentrations of acids, bases, salts and a variety of oils and solvents.

3. It is an excellent insulating material used to make insulators.
Good dielectric properties are still protected at high frequencies. It has good microwave permeability and has been widely used in radomes.

4. Good thermal performance
FRP has a low thermal conductivity and is an excellent thermal insulation material. In the case of transient ultra-high
temperature, it is an ideal thermal protection and ablation resistant material.

5. Excellent craftsmanship
The molding process can be flexibly selected according to the shape, technical requirements, use and quantity of the product. The process is simple, can be formed at one time, and the economic effect is outstanding, especially for a product with a complicated shape and a small amount of molding, and the process superiority is more prominent.

Items	Result
Density	1.85g/cm3
Water Absorption	0.57%
Flexural modulus	18.6 GPa
Flexural strength	302 MPa
Tensile strength	210MPa
Tensile Modulus	22GPa
Flame retardant rating	V0/V1
Dielectric breakdown voltage	14.98KV
Place of Origin	Hebei China
Type	Round tube, square tube,rectangular tube, I beam,Angle , C channel, Accept customized
Length	as your required
Technique	Pultrusion
Surface treament	Smooth
Processing Service	Bending, Decoiling, Moulding, Welding, Punching, Cutting

Fiberglass tube size
Round Tube size (Diameter)mm	Square tube(L*W)mm	Rectangular tube (L*W) mm
25mm	25*25	50*25mm
32mm	20*20	51*38mm
38mm	25*25	52*32mm
42mm	30*30	70*28mm
50mm	40*40	91*38mm
64mm	50*50	91*112mm
76mm	60*60
89mm	100*100
101mm	150*150

Anti-Corrosion Structural FRP pultruded handrail 50mm square hollow section FRP Square Pipe fiberglass square tube is a profile with a fixed cross-section shape that is continuously produced by using glass fiber as a reinforcing material to form a mold with a consistent cross-sectional shape, and after solidification and molding. The value of its longitudinal bending strength and impact strength exceeds that of ordinary profiles. The use of glass fiber mat increases the transverse strength of the profile so that it has good anti-corrosion and anti-cracking properties. Therefore, glass fiber tube have great advantages, such as light weight, high strength, good elasticity, stable and precise dimensions, insulation, non-thermal conductivity, flame retardant, beautiful and easy to maintain. Fiberglass tube are widely used, and can be used in flagpoles, awnings, tents, curtains, benchmarking poles, exhaust fan columns, car antennas, construction, bridge reinforcement, mechanical drive shafts, golf clubs, courtyard fences, kite frames, umbrella frames, and support blankets Frames, aircraft modelframes, luggage frames, fishing gear accessories, etc., especially in corrosive environments, are ideal products to replace steel and other materials. Features: 1: Strong corrosion resistance, good heat resistance and cold resistance, good verticality, good mechanical strength; suitable for the rotating shaft of circuit board printing equipment 2: High-strength and light-weight impact resistance: flying butterfly ring, baby carriage bracket, game blanket support rod, kite windmill, toys and other livelihood industries 3: Insulation, anti-static, good permeability: suitable for aerospace, construction machinery and equipment, transformers and other structural materials 4: Anti-aging, long life, maintenance-free: switch pins, water sports equipment, etc. 5: Fireproof and flame retardant, insulation, heat insulation and UV resistance 6: Strong designability, light weight, smooth and beautiful appearance

Product Features

Exquisite raw materials

The product is composited with glass fiber reinforced plastic unsaturated polyester resin

High quality

The pultruded profile has a high glass fiber content and other composite materials have high molding processes, so the longitudinal strength is higher and the pultruded profile has a lower modulus than steel. Usually only 1/7-1/10 of steel

Long use time

The pultruded profile is made of thermosetting resin fiber different from the normal service life of general thermoplastic products of 20 years

Easy maintenance

The pultruded profile is made by blending the color into the resin. The color of the product can be blended arbitrarily according to the customer's requirements. It is not easy to fade, does not require paint maintenance and has a self-cleaning function.

Customized

We accept customized, if you want other size, please contact e at any time

Product production process

Packing & Delivery

Anti-Corrosion Structural FRP pultruded handrail 50mm square hollow section FRP Square Pipe fiberglass square tube packing by film

Product application

Company Profile

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 7-30 days, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but you need pay the cost of freight.

Q: What is your terms of payment ?
A: Payment≤1000USD, 100% in advance. Payment≥1000USD, 30% T/T in advance and the balance before shippment.