Custom Size Stainless Steel L Type Bracket For Granite Marble Fixing Stone Cladding Clamps
Product Description
Fixing bracket for cladding system
1. Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.
2. In horizontal joint installation slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half.
3. The weight of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure .
4. In vertical joints installation slabs are pinned at the left and right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right.Anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure .
5. Three - dimensional adjustability allows quick and easy installation.
1. Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.
2. In horizontal joint installation slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half.
3. The weight of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure .
4. In vertical joints installation slabs are pinned at the left and right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right.Anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure .
5. Three - dimensional adjustability allows quick and easy installation.
Number | Length | width | Hight | thickness | hole diamter | Nut |
RC-01-1 | 40 | 40 | 40 | 3.5 | 10 | M8 |
RC-01-2 | 40 | 50 | 40 | 3.5 | 10 | M8 |
RC-01-3 | 40 | 60 | 40 | 3.5 | 10 | M8 |
RC-01-4 | 40 | 70 | 40 | 3.5 | 10 | M8 |
RC-01-5 | 40 | 80 | 40 | 3.5 | 10 | M8 |
RC-01-6 | 40 | 90 | 40 | 3.5 | 10 | M8 |
RC-01-7 | 50 | 50 | 50 | 4.5 | 13 | M10 |
RC-01-8 | 50 | 60 | 50 | 4.5 | 13 | M10 |
RC-01-9 | 50 | 70 | 50 | 4.5 | 13 | M10 |
RC-01-10 | 50 | 80 | 50 | 4.5 | 13 | M10 |
RC-01-11 | 50 | 90 | 50 | 4.5 | 13 | M10 |
RC-01-12 | 50 | 100 | 50 | 4.5 | 13 | M10 |
RC-01-13 | 40 | 40 | 40 | 3 | 10*20 | |
RC-01-14 | 40 | 40 | 40 | 4 | 10*20 | |
RC-01-15 | 40 | 60 | 40 | 4 | 10*20 |
Number | Projection(mm) | Dead Load(N) | Offset (mm) | Wind Pressure(N) | Wind Suction (N) | Length(mm) | Thickness(mm) | Bolt Sizes | Pin diameter |
RC-02-33010-10 | 45 | 500 | 10 | 312 | 219 | 45 | 3.5 | M8*80 | φ5*70 |
RC-02-33015-10 | 50 | 500 | 15 | 50 | 3.5 | ||||
RC-02-33020-10 | 55 | 500 | 20 | 50 | 3.5 | ||||
RC-02-33025-10 | 60 | 400 | 25 | 50 | 4.5 | ||||
RC-02-33030-10 | 65 | 400 | 30 | 60 | 4.5 | ||||
RC-02-33040-10 | 75 | 400 | 40 | 60 | |||||
RC-02-33050-10 | 85 | 400 | 50 | 70 | |||||
RC-02-33060-10 | 95 | 300 | 60 | 70 | |||||
RC-02-33080-10 | 115 | 300 | 80 | 70 | |||||
RC-02-330100-10 | 135 | 300 | 100 | 70 | |||||
RC-02-330120-10 | 155 | 250 | 120 | 70 | |||||
RC-02-33020-12 | 75 | 500 | 20 | 468 | 328 | 60 | 4.5 | ||
RC-02-33040-12 | 95 | 500 | 40 | 60 | |||||
RC-02-33060-12 | 115 | 400 | 60 | 80 | |||||
RC-02-33080-12 | 135 | 300 | 80 | 80 | |||||
RC-02-330100-12 | 155 | 300 | 100 | 80 | |||||
RC-02-330100-13 | 175 | 300 | 100 | 80 |
Projection sizes between 30 and 50mm
Load up to 400N
Number | projection | wind pressure | wind suction | Dead load | Length(mm) | Thickness(mm) | Bolt size(mm) | Pin diameter(mm) |
RC-03-302 | 30 | 312N | 219N | 200N | 32 | 3 | M8*80 | 12 |
RC-03-352 | 35 | 37 | ||||||
RC-03-402 | 40 | 42 | ||||||
RC-03-452 | 45 | 47 | ||||||
RC-03-502 | 50 | 52 | 4 | |||||
RC-03-552 | 55 | 57 | ||||||
RC-03-304 | 30 | 400N | 624N | 400N | 32 | 3 | M8*80 | 15 |
RC-03-354 | 35 | 37 | 4 | |||||
RC-03-404 | 40 | 42 | ||||||
RC-03-454 | 45 | 47 | ||||||
RC-03-504 | 50 | 52 | ||||||
RC-03-554 | 55 | 57 |
Other L type stone fixing bracket:
Application
Company Profile
Cangzhou Ruichi Hardware Manufacturing Co., Ltd
We are professional in the One-Stop Solution for OEM &ODM metal stamping. We are also a professional manufacturer and supplier of spare parts specializing in stamping, sheet metal, CNC machining, chasis and cabinets.
We are professional in the One-Stop Solution for OEM &ODM metal stamping. We are also a professional manufacturer and supplier of spare parts specializing in stamping, sheet metal, CNC machining, chasis and cabinets.
FAQ