Description

1. This product is manufactured with high-purity, stable and high-quality raw materials, and under meticulous and cautious management and control, which possesses the high quality.

2. It applies for bindings of all kinds of materials and mending of seam and dents of the surface of the stone products

3. It possesses the character of high intensity, stable of storage , and with natural stone luster after polished..

 4, smooth and delicate, easy to reconcile, transparent glue curing high transparency, high bonding strength, good weather resistance.

 5. It normally contains 7 colors: transparent, beige, white, super white, black, red and green, and also can  mix with our pigment in 12 colors. 

6. It’s suitable to store in cool and ventilating environment, and avoid sunshine.

Application

It’s widely used in fast fixing and pattern making ,bonding and repairing of stone and ceramics.

Packing Specification

0.6L ,0.7L ,0.8L,1L,3L,4L,18L,20L. 

Main Composition 

unsaturated polyester resin, 

peroxide, 

fillers

Directions: 

1, Keep the surface to be treated dry, clean and slightly rough. 

2. Add 100 parts of adhesive with 2-3 parts hardener.

3. Mix the two ingredients thoroughly and apply in the surface with knife.

Attention

1.Do not return the excess glue to the original packing.

2. Store in cool place and keep the lid tightly closed after use. 

3. Do not use on structural bonding like dry hanging of stone.

4. Do not operate in wet circumstance,or it will cause sticky on the surface.

5. The construction temperature arranges from -10 °C to 40 °C.

6. Over dosed hardener (more than 3% ) may cause the color change and reduction of adhesion.

7. Temperature in construction is suggested to below 50 °C.

8. Avoid frequent contact with moisture and frost.

USED FOR ALL KINDS OF STONE:BONDING;SETTING;FILLING;REPAIRING;FIXING.

1)The product is manufactured with high pureness,stable and high quality materials.

2) There is three packing size:1L,4L,19L.

3) The color has transparent, beige,white,black and other colors.

4)The product is suitable to keep in cool and ventilating enviroment and avoids sunshine.

5)*The main composition is Polyester Resin and fillings.

6)*The main properties: Short cure time, can be operated in cold weather

7)Various color for all kinds of stones,hard enough for polish.

8)*Usage: keep the surface to be bonded dry and clean, add 100parts adhesive with 2-3 parts hardners,mix thoroughly and apply with facer.

9)*Storage:12months if stored in cool places.