Product Overview
SGUV-800A Automatic high-speed dual-purpose UV coating machine
Automatic single head uv coating machine is a technical upgrade model. It adopts metering roller frequency conversion speed regulation. Easy to operate, and the surface of the coated products has been fundamentally changed, and there is basically no orange peel, so that the coated products have achieved the ideal effect.
FEATURES AT A GLANCE
•Faster speed 80m/min
•UV curing & IR drying
•3 uv lamps &18 IR lamps
•Use uv oil ,water oil, soft touch oil..
•Larger rubber roller 165mm diameter
•Deal with thin paper to 80gsm
•Customized on demand
PRODUCT SPECIFICATIONS
No | Item | SGUV-800A |
1 | Max. Sheet Size | 760*1000mm |
2 | Min. Sheet Size | 270*270mm |
3 | Sheet Weight | 80~450g/m2 |
4 | Speed | 0~80m/min |
5 | Power | 45Kw |
6 | UV Lamp | 2pcsx8Kw |
7 | IR Lamp | 18pcsx15Kw |
8 | Paper feed height | 1100 |
9 | Paper stack height | 1050 |
10 | Weight | 6000kg |
11 | Dimension | 10000x1800x2000mm |
PRODUCT CONFIGURATION
•Paper pre-stacker，to realize non-stop paper feeding and receiving
•High degree of intelligence, one-button start and acceleration, more convenient and efficient than traditional segmented control.
•The shaft head is 55mm large, which is more stable and firmer than the traditional 35mm under high speed, without deformation, and good coating effect!
•Synchronous belt transmission, the equipment is more stable, no jitter. The surface texture effect will be better in high-end products.
•The oil guard has high precision, and it is more difficult for water to enter the bearing than the traditional one.
•The air knife is easy to operate! High-precision correction, tight on both sides, no slight soft deformation and damage to the mesh belt.
Auto Feeding System
1：Adopt high-speed offset press feeder (12000 sheets/hour) to ensure fast and stable operation
2：Paper photoelectric control, automatic lifting
3：Double protection feeder lifting safety
4：Using the latest paper stacker design, the entire tray can be pushed in, and the tray can be pushed in directly after printing, without manual paper sorting. Pre-stacker can also be used. two-way choice. Greatly save paper time and reduce the labor intensity of operators.Coating section
1: Using cast iron body, strong rigidity and long life
2：Three-roll reverse coating3：Equipped with an air knife, it can make 80G thin paper, the size of the wind, and the time of blowing are controlled by PLC.
4：Automatic stop function for roll paper
5：Automatic counting function
6：The rollers are adjusted synchronously, driven by the synchronous belt to make the coating effect stable and great.
7：Equipped with two oil tanks, UV and IR, and equipped with temperature heating control to ensure that the UV oil is coated between 40-60 degrees
8：The gap between the coating roller and the pressure roller of each machine head is adjustable from 0-50mm.
9：The main rollers adopt 55-diameter shaft heads and heavy-duty bearings, which greatly extend the life of the bearings.
10：The diaphragm pump is used for oil supply, no motor is needed, and the operation is safer.
11：Double scrapers and a unique bottom roller automatic cleaning system, double oil pan device, the lower roller is immersed in the small oil pan when working, which can effectively clean the lower roller and prevent the oil from drying during shutdown
IR Drying and UV Curing System
1：The better the leveling of the oven, the stronger the drying and curing.
2：Equipped with UV and IR systems, which are controlled separately and cannot be used at the same time.
3：27 IR lamps and 3 UV lamps, IR lamps generally have a life of 2 years, UV lamps have a life of 800~1000H, and transformers have a life of more than one year .
4：The UV part adopts 8-12KW adjustable electronic light source, which has greatly improved safety performance than the traditional voltage source light source.The light source can adjust the brightness automatically as the change of machine's running speed, which can be changed from 30% to 100%. Thus the average energy consumption is saved by more than 30%.
5：Emergency stop or overheat protection device, when the emergency stop or the temperature inside exceeds 150 degrees, the protective cover will automatically rise to dissipate heat to prevent fire
6：Equipped with a ventilation system, under the UV curing box, there is a strong suction device composed of an exhaust fan and a wind box, which can extract ozone, dissipate heat and make the paper not easy to curl in the furnace, but can pass smoothly.
7: Equipped with automatic correction system, (double correction, double over-limit protection). The paper conveying adopts the imported Teflon conveyor belt, which can prevent ultraviolet rays, is strong and durable, does not support the paper, the electric eye detects the Teflon conveyor belt, and the automatic homing correction device
8：The whole process of suction to ensure that the coating products will not float and do not pile up paper. The oven is equipped with iron wire protection to prevent the paper from floating on the paper and cause a fire.
Company Profile
2. Having ISO 9001-Certified Factory
3. Strong R&D capability
4. High Quality Guaranteed
5. First Class Service And Best Prices
Laminating Machine
Coating Machine
Folder gluer
Flute Laminating Machine
Rigid Box Machine
Paper Tube Machine
Vertical Laminating Machine
Die Cutting Machine
Hot Stamping Machine
FAQ
Q1: Are you a manufacturer?
A1: Yes, we have been manufacturing post press machines over 12 years and also we are a professional exporter. we can guarantee our price is first-hand, very cheap and competitive.
Q2: Which certificate do you have for your equipment?
A2: All of our machines have CE certificate
Q3: What is the machine warranty?
A3: One year warranty after sales, actually our longest cooperation customer have been using our product for more than 10 years with no problem
Q4: What is the delivery time?
A4: Generally 20-30 days after receiving the deposit, depending on your order.
Q5: What’s the payment term?
A5: Usually we appreciate T/T 30% deposit, then 70% balance is paid before shipment.But we also accept other way like western union, L/C.
Q6: Do you have machines in stock?
A6: For standard model, we have a large quantity in stock. For customized model, we need 20-30 days to produce for you.
Q7: How can you assure the machines’ quality?
A7: All the products will be 100% checked before the shipment.48hours running without stop to confirm no problem
Q8: Do you inspect machines or test running before packing?
A8: Each machine will be test running at least 24 hours before delivery to assure the quality.And we'll share videos and picture with you.
A1: Yes, we have been manufacturing post press machines over 12 years and also we are a professional exporter. we can guarantee our price is first-hand, very cheap and competitive.
Q2: Which certificate do you have for your equipment?
A2: All of our machines have CE certificate
Q3: What is the machine warranty?
A3: One year warranty after sales, actually our longest cooperation customer have been using our product for more than 10 years with no problem
Q4: What is the delivery time?
A4: Generally 20-30 days after receiving the deposit, depending on your order.
Q5: What’s the payment term?
A5: Usually we appreciate T/T 30% deposit, then 70% balance is paid before shipment.But we also accept other way like western union, L/C.
Q6: Do you have machines in stock?
A6: For standard model, we have a large quantity in stock. For customized model, we need 20-30 days to produce for you.
Q7: How can you assure the machines’ quality?
A7: All the products will be 100% checked before the shipment.48hours running without stop to confirm no problem
Q8: Do you inspect machines or test running before packing?
A8: Each machine will be test running at least 24 hours before delivery to assure the quality.And we'll share videos and picture with you.
Contact with Us