rewinder ,
this one it is an customized rewinder for our customer
Technical Data as below :
model | max feeding width (mm) | main engineer power (kw) | speed (m/min) | size (mm) |
DP -650 | 650 | 3 | 30--80 | 1400*1200*1300mm |
Feeding diameter (mm) | Rewinding diameter (mm) | presicion (mm) | Voltage (v) | |
76-1000mm | 25.4-1000mm | ±0.1 | 1 phase 220V 50HZ | |
Machine Size | Net weight | Gross weight | Main Motor Power | Total power |
1250*1150*1250mm | 150KG | 200KG | 1.1KW | 2KW |
configuration list as below
include
1 air shaft 3" ( unwinding part )
1 air shaft 1 " ( rewinding shaft )
with one pneumatic for the support of rewinder shaft
2 Nip Roller
Pneumatic cylinder for Nip roller gap adjustment
Steel plate for cutting part
1 Frequency Controller
1 DC motor control panel
1 DC motor gear reducer
1 clockwise or counter switch
1 speed controller
Meter counter
Tension controller
This machine is the supporting equipment for die cutting machine and sheet cutter.
used for unwind and rewind roll materials.
Feeding Width: 650mm
650 rewinder electric box
650 rewinder
650 rewinder
NIP ROLLER AND Pneumatic
unwinding part side
Rewinding part side
And about machine
The rewinder is abel to handle materials up to 650mm width , the speed and rotation
direction are all adjustable , it allows to rewind the material face in or face out ,
the tension arm adjusts the speed rotation : when it is down , the rewinder turns at full speed ,
whereas when the tension arm is up . the rewinder is idle and blocks the motor's ratation when the die cutting
machine stops
Working Method: positive direction, opposite direction, auto-sensing
Max Speed : 70m per minute