Hydraulic Die Cutting Machine, buy high quality Non-Woven Gaskets Die Cutting Machine on China Suppliers Mobile

Product Details

Product Description

Product Detail

Max feeding width	650mm
Die cutting area	650mmX600mm
Cutting force	40 Ton
torlerance	0.03mm
Servo Motor	Delta
PLC	Mitsubishi
Application	die cutting felt etc
Function	die cutting-waste draining
Product Keywords	Non-Woven Gaskets Die Cutting Machine,Non-Woven Gaskets Cutting Machine,Machine For Die Cutter Gasket

Quality assurance:

1. Mitsubishi BRAND PLC
2. Touch Screen
3. Optoelectronic safety
4. Automatic Pressure regulating motor
5. Host Machine Motor
6. Oil Bump
7. Magnetic Valve ,cooler
8. Host Machine hydro-cylinder
9. Flatbed cylinder
10. Servo Motor

ITEM NO.	Pressure	Max feeding width	Die cutting area	Main engine power	Voltage	cutting speed
	Ton	mm	mm	HP	V	times/minute
DP-40 TA	40	450	450*450	5.5	3 phase AC380V 50HZ	30
work table height	max open distance	max traveling distance	precision	packing size	weight	cutting type
mm	mm	mm	mm	cm	KG	work with mould to achieve kiss cut die cut
800	100	100	0.03	X	3500	work with mould to achieve kiss cut die cut
function :	Used for die cutting genuine leather,microfiber , PE/ PVC/PP etc plastic film , paper , foam, EVA sponge , non woven etc kiss cutting

WITH UP PUNCHING PLATE have clamping tool that install the cutting mould easily /

The oil pressure system uses advanced, durable special circuit and electric control system of high stability, up to Super level of effectiveness.

Electronic positioning, precision and control in 0.02mm, inferred from round precision control at 0. 05mm.

Machine feet install the SHIM, body solid and reliable.

Longer tool life, processing objects can be broken and half broken, cut smooth without edges.

PLC man-machine automatic program control oil system with integrated control, opto-electronic protection.

Details description of machine :
I , unwinding part ---------------max width 450mm
1, unwind : 3 inch air-shaft , AC Motor , frequency control

2, unwinding effective width : 450mm , max diameter is 500mm
3, touch sensor sense have material or not
4, Servo motor control the pulling roller ,
pulling roller is rubber material , opening height is adjustable at least 24mm

II , Main Machine ------------ Die cutting area 450mm*450mm
1, Four shaft hydraulic machine
2, max cutting force : 40 Ton
3, shock proof
4, with light for the die cutting part so that easy installing mould and watch the die cutting part
5, plane die cutting area 450mm length , 450mm width
6, Safety Light Curtains at four corner .

III, electronic PLC control
1, LCD touch screen , computer control base
2, with password for data protection
3, can save the datas that setted
4, low maintainance
5, all the parts are under CE safety standard , electronic parts have CE mark
6, all the cutting / unwinding length and number are can set in the touch screen
7, cutting depth precision control at 0.025mm
8, stroke is controlled in 50--101.6mm

IV ,die cutting mould installing
with clamp tool and locking tool so that can put mould in directly and then locked , change mould in few time

V, mould plate package
1,with up and down cutting boards
2, stainless steel material mould plate , polished , easy control the cutting depth , can cutting both kiss cut and through cut
3, one piece PET or PVC sample for mould protective


VI, scrap/ waste Rewinding
1, three inch airshaft rewinding width AC motor control
2, max rewinding diameter is 500mm,
3, bearing weight at 22KGS
4, effective width 450mm
5, with dancer for the tension control

VII , slitter 1, with one slit knife installed before rewinding

VIII , Rewinder -----------up and down 2 air-shaft for rewind
1, with max roll diameter 450mm
2, Rewinding shaft is 3 inch airshaft
3, AC motor , speed can increase or descrease , with switch if forward/ reverse
4, effective width have to can rewinding the slitting to 2 part material

Product Detail

Quality assurance:

DP-40TA Hydraulic Press Die Cutting Machine

LCD reflection film automatic die cutting machine

EVA Foam/ sponge/felt Kiss Cut Die Cutting Machine