Modbus is one of the most commonly used protocols in the field of industrial automation. It supports the traditional RS-232 / 422 / 485 serial port equipment and the newly developed network equipment. Fbmgs5100 is a standard model of 1-way MODBUS gateway device, with 1 RS-232 / 422 / 485 serial port. The serial port working mode can be set freely. It supports the access of 16 TCP clients and the connection of 32 TCP servers. It can complete the protocol conversion from Modbus TCP to Modbus RTU / ASCII.            

characteristic:

Integrated Modbus TCP and Modbus RTU / ASCII network

Each serial slave port supports up to 31 Modbus RTU / ASCII slave devices

The gateway device can connect up to 32 Modbus TCP servers (slave)

Support 10 / 100M network adaptation and DHCP

The serial port can be set to RS-232, RS-422 or RS-485 mode

Up to 16 Modbus TCP clients (Master) are allowed to connect to the gateway device

The baud rate of the serial port is up to 921.6kbps

The path can be automatically selected from the ID table

Ethernet interface

Rate: 10 / 100 Mbps, adaptive MDI / mdix

Interface: RJ45 8-pin

Protection: built in 1.5kV electromagnetic isolation

serial interface

Serial port type: male DB9

Serial port signal: RS-232: TXD, RXD, RTs, CTS, DTR, DSR, DCD, GND

RS-422：Tx+、Tx-、Rx+、Rx-、GND

RS-485 (2-wire)：Data+、Data-、GND

RS-485 (4-wire)：Tx+、Tx-、Rx+、Rx-、GND

Serial communication parameters

Check bits: none, even, odd, space, mark

Data bits: 7, 8

Stop position: 1, 2

Flow control: RTS / CTS, Xon / XOFF, DTR / DSR

Transmission rate: 50 bps to 921.6 kbps

Serial port protection

Provide 15 kV ESD linear protection and surge protection for all signals

Power linear protection

4 KV Burst (EFT)，EN61000-4-4

2 KV Surge，EN61000-4-5

Power demand

Power input: 12 ~ 48 VDC, dual power redundant input.

Power interface type: terminal block

Tel: 13336062152 / 13867426148 (same wechat number);

EMAIL: ffy@anyfbus.com     Welcome to inquire.