Flow meter PCB board electromagnetic flow meter converter FT8210H

 

Transmitter outline dimension and type

According to the size of the sensor, we offer four kinds of transmitter housing, As shown in the figure below, please note: the PCB board, software and menus and functions are be the same, only the size of housing and shape of the housing is different.

 

 

Language And LCD Display

English ,With LCD,display flow rate , total flow , velocity etc three internal accumulator, record positive total flow and reverse total flow and net total 3.6V battery power emf type with backlight.

 

Nonlinear Correction Function:Multi segment linear correction,suitable to variety of sensors

Automatic Zero Calibration Function

Quick Response, Response time of 0.3 seconds

Electrode Self-Cleaning Function

 

 

Transmitter outline dimension and type

According to the size of the sensor, we offer four kinds of transmitter housing, As shown in the figure below, please note: the PCB board, software and menus and functions are be the same, only the size of housing and shape of the housing is different.

Suitable to Size of the Sensor (mm):

1,2,3,6,8,10,15,20,25,32,40,50,65,80,100,125,150,200,250,300,350,400,450,500,600,650,700,800,900,1000,1100,1200,1300,1400,1500,1600,1700,1800,2000,2200,2400,2600,2800,3000

 

Power Supply

Power supply :85VAC --- 265VAC or or 110VAC to 420VAC or 24VDC or 3.6v lithium battery

 

Requirement For Sensor And Excitation (AC and DC power supply type)

 

Excitation current can be set to 125mA,160mA,250mA  

250mA excitation current is suitable to the resistance of two coil: 35~ 65ohm

125mA excitation current is suitable to the resistance of two coil: 65 ~ 120ohm

excitation frequency:25HZ;12.5HZ,6.25HZ,3.125HZ 

 

Communication

RS485 (standard),HART (option) MODBUS interface:RTU format,Physical interface:RS-485,Electrical isolation:1000V; HART interface:Support standard HART protocol