Full Notch Creep Tester with 4 independent test positions
Full Notch Creep Tester with 4 independent test positions
Full Notch Creep Tester with 4 independent test positions

Full Notch Creep Tester with 4 independent test positions

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Anytester (hefei) Co., Ltd.

Business Type: Manufacturer
Main Products: , , ,

Product Details

Product Description

AT416 Full Notch Creep Tester is used to determine the stress cracking resistance of polyethylene materials in any environment. A test specimen in the form of a square-section bar with coplanar notches in each face at the center, is subjected to a static tensile load in a temperature-controlled environment. The geometry of the specimen is such that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.
Standard
ISO 16770, 899
GB/T 11546
Details & Features
Model
AT416
Specimen size
100mm×10mm×10mm, 100mm×10mm×4mm, 90mm×6mm×6mm
Load range
20N~5000N
Load accuracy
±1% of nominal value
(with automatic calibration function)
Working position
6
Displacement range
0~200mm
Displacement accuracy
0.027mm
Temperature range
RT~95℃ or 23℃~95℃ (with refrigeration device)
Temperature accuracy
±0.5℃
Power supply
AC380V, 50Hz
Dimensions
1620×850×1750mm
Specification
★ 6 independent test positions, automatic loading, easy to operate, accurate and reliable ★ Independent elastic supporting mechanism, non-interfering
★ Industrial PC control, touch screen operate, can store file, test data and automatically calculate failure time under condition of specified load, and also can draft several curves such as displacement-time, load-time, stress-failure time
★ Test environment: thermostatic water bath ★ High precision servo motor drive system, excellent performance, long service life, low noise
Our Company

History

Since 1982 with more than 20 years’ experience

Warranty

Two Year Warranty for whole product

Training

Video and user manual for training

Onsite service

Installation and training service is available

Testing service

Free sample testing before order is available

Lead time

15 working days lead time for most product

Packing & Delivery
Packaging



Packaging Details
1. The equipment is covered with film is protect it from water vapour during the trip. 
2. The box is filled with foam to protect the equipment from impact. 
3. Exported wooden box made from plywood, don't need fumigated. 
Payment




Payment Term


T/T
EXW

30% T/T in advance, paid the balance before shipment
FOB
CFR(C&F)

30% T/T in advance, paid the balance against copy of B/L
CIF
L/C
L/C amount above 50,000 usd, we can accept L/C at sight
West Union

Amount lower than 5000usd
West Union
Delivery Time
7~10days after receiving payment for one container
Contacting Us

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Measurement & Analysis Instruments > Testing Equipment
Categories
Hi~