Plastic Tester, buy ASTM D1709 Electric Plastic Falling Dart Impact Tester on China Suppliers Mobile

Product Details

Product Description

AT305A Electric Falling Dart Impact Tester (original HY4241-I) is used to determine the impact resistance by free-falling dart method. It can be used for plastic films, sheets and composite films e.g. PE preservative films, wrapping films, PET sheets and other food package and heavy package, aluminum foils and aluminum plastic composite films, paper and paper board etc. It can meet the request both of method A and method B. Principle: Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas.

Standard

ISO 7765	ASTM D1709
JIS K7124	GB/T 9639

Specification

Model	AT305A
Operating temperature	5~35℃
Missile weight	50~2000g
Dart shaft	Diameter: Ф6.5±0.1mm Length: 115mm
Hemispherical head	Ф38±1mm, Ф50±1mm
Inside diameter of specimen clamp	125±2 mm
Impact height	0~2000mm

Details

★ It consists of falling dart, elevating mechanism, dart release mechanism, working table, electric cabinet, etc. ★ Two test methods of A & B according to standard specifies ★ Pneumatic clamping, convenient and reliable

Our Company

History

Since 1982 with more than 20 years’ experience

Warranty

Two Year Warranty for whole product

Training

Video and user manual for training

Onsite service

Installation and training service is available

Testing service

Free sample testing before order is available

Lead time

15 working days lead time for most product

Packing & Delivery

Packaging
Dimensions	1160x510x1050mm
Weight	Approx. 80kg
Packaging Details	1. The equipment is covered with film is protect it from water vapour during the trip. 2. The box is filled with foam to protect the equipment from impact. 3. Exported wooden box made from plywood, don't need fumigated.

Payment

Payment Term	T/T	EXW	30% T/T in advance, paid the balance before shipment
			30% T/T in advance, paid the balance before shipment		FOB
				CFR(C&F)	30% T/T in advance, paid the balance against copy of B/L
				CIF	30% T/T in advance, paid the balance against copy of B/L
		L/C	L/C amount above 50,000 usd, we can accept L/C at sight
		West Union	Amount lower than 5000usd
		West Union	Amount lower than 5000usd
Delivery Time	7~10days after receiving payment for one container

Contacting Us