Briquette Machinery, buy High Quality Coal and Charcoal Ball Press Powder Briquette Making Machine Factory Price on China Suppliers Mobile

Product Details

Product Description

Brief introduction of iron dust press briquette machine

Iron dust press briquette machine can be used to press coal, iron powder, coke, aluminum, iron scrap, iron oxide, carbon, charcoal, slag, gypsum powder, tailings, sludge, kaolin, activated carbon,ect. Through continuous and meticulous research, our employees found that the use of wear-resistant alloy material can solve the problem that the pressure roller can not be used for a long time, and the service life of the pressure roller is increased by three to four times.

working principle of iron dust press briquette machine:

Raw materials are quantitatively and evenly fed though the middle material silos to the prepressing feeding device. Raw materials in the prepressing feeding device are forced to pressure in the middle of the two rollers of mineral powder briquette machine by pre compression spiral. After prepressing and excluding gas, raw materials are sent to arc slot mouth of the two rollers. There are ball sockets uniformly distributed on the surfaces of the two rollers. The two rollers move together through the meshing transmission of the gear deceleration device. Then materials between the two rollers are pressed into certain shapes. After that, the two rollers separate slowly, and the shaped materials fall down from the ball sockets because of their own gravities, so as to complete the balling process.

Technical Parameter

Model	Ratio	Roller Size(mm)	Main Shaft Speed(r/min)	Matched Power (kw)	Capacity(t/h)
KF500-370-280	40.17	Φ370*280	8-10	11	6.5-7.5
KF650-500-300	40.17	Φ500*300	8-10	37	8.5-9.5
KF850-650-300	40.17	Φ650*300	8-10	55	10.5-11.5
KF1250-750-350	50	Φ750*350	7-9	110	13.5-14.0
KF1450-850-350	63	Φ850*350	7-9	132	15.0-16.0
KF560-1000-350	50	Φ1000*350	7-9	150	17.0-20.0

Detailed Images

Roller material

The iron dust press briquette machine roller adopts 65Mn or 9Cr2Mo or high chrome alloy, and treated by heat processing for 3 times, and
the final roller can use 7200-9000 hours under 7*24 hours non-stop running in right operation.

Briquette Shape.

The final briquette out from our iron dust press briquette machine can be oblate, pillow and oval shape.The briquette size between 20-75mm.

Please confirm briquette shape and size before briquette machine.

Packing & Delivery

Our Company

FAQ

· Q: Can only one set briquette machine complete briquetting?

A: No, before briquetting, the raw materials should be in 0-5mm, the water content of raw materials should be 8-15%, aslo some raw materials maybe need binder in process,so in general the complete briquettes production line include Drying --- Hopper --- Crusher--- Mixer--- briquette machine--- Briquette Dryers, but if you had those auxiliary equipment,you can only order briquetting machine.

· Q: What is the binder in process?

A: It is depend on the properties of your raw materials, and also usage of briquettes. We have some formula of binders for some of raw materials, we would like to share them to our customers.

· Q: How about the hardness of briquettes?

A: Our briquette machine adpot 9Cr2 forging steel to make rollers, with a hydraulic station, the whole pressure is very high, the briquettes will not broken when it drop up from 5meters high.

· Q: After ordered a briquette machine, how do we slove the equipment installing?

A: For a small single briquette machine, we offer you user manual, customer will install and commissioning as operating introduction; For a complete production line, we will send our engineer to your workplace to help you install and commissioning untill machines work normally.

· Question : What's the delivery time after I pay the deposit?

A: We will clear delivery time in slaes contract, Single briquette machine often deliveried within 10-15 working days after receipt of the pre-payment. Complete briquette production line will delivery within 25-40 working days after receipt of the pre-payment.