company describe: wood peeling machine

Henan Jingxin Machinery CO.,LTD is a machine manufacture, established in 1990,with 120 employees 

introduction for the machine

  Wood debark or wood peeling machine

1>This machine is the rotor teeth with stripping produced a unique force, so that wood in the hopper tank plate section of a recurring cycle of movement, but also around its own axis to do wood turning motion segment and irregular beating. To this paragraph with wooden teeth, wood and wood paragraph paragraph paragraph wood and keep the friction between the storage tank, impact, compression, fast bark are separated, to achieve effective peeling effect.

 

2>One end to put in and the other for outlet , it’s better than the rotary one  which have to stop the motor to take the peeled trees out

 

3>Can suit for many kinds of different trees , especially for the bend one  have more high peeling rate than the traditional rotary type

 

4>The machine is fixed when working , so the power consumption and the failure rate  is small and with low noise ,

 

Wood barker is a new generation wood peeling equipment with high efficiency which was innovated by our factory on the basis of foreign advanced technology. It had single and double roller type according to different wood with different diameter. This machine adopts open groove peeling room, the wood come into the peeling room from one side and come out from the other size. So it is continuous working. It conquer the defect of rolling drum and improve capacity greatly. It is suitable for big diameter wood and large scale factory.

 

technology parameters :

Model	Jx-8000	Jx-10000
Motor	11kw, 3 phases, 380v.50 hz	15kw,3 phases,380v,50hz
Capacity	6-8 t/h	10-12 t/h
Barking rate	> 90%	>95 %
Log length	3-4 m	5-6 m
Log loss rate	< 2%	< 2%
Log diameter	No limitation	No limitation
Diamension	8*1.4*1.7 m	12*1.5*1.7 m

 

 

 

 

  

connect name card :

 

 

 

 ~~~~~~~~~~~~~~