Ore Beneficiation Equipements, buy Heavy Mineral Sand Mining Recovery Machine with Centrifugal Concentrator on China Suppliers Mobile

Product Details

Product Description

Heavy Mineral Sand Mining Recovery Machine with Centrifugal Concentrator

centrifugal concentrator gold recovery / centrifugal concentrator mining / centrifugal mineral concentrator

Brief introduction of Mineral Sand Mining Recovery Machine with Centrifugal Concentrator
Gold centrifugal concentrator is an important gravity beneficiation equipment developed by our factory. It is proved by experienced practices that this equipment is high efficient for recovery of placer gold, rock gold, lode gold and monomeric gold in multi-metal ore. It had earned high reputation for replacing mercury plate or any toxic chemical, removing the chemical harm to human body and conductive to environmental protecting.

Application shows that the recovery rate can be as high as90% in tin ore, Pb ore, antimony ore, sliver ore, gold ore,etc.especially for the case less than 2.5mm heavy ores, can reach to 92%.
Note: The standard slurry density in feeding is 35%, The water pressure level in separation process is 0.03-0.06Mpa. This figure is only for your reference, for example: named the water pressure as A=0.02mpa, B=0.03mpa, C=0.04mpa, and then testing these three
figures to check the gold concentration grade, delete the lowest grade matched figure, and then text again to choose the most suitable water pressure figure.

centrifugal concentrator gold recovery / centrifugal concentrator mining / centrifugal mineral concentrator

Working principle of Mineral Sand Mining Recovery Machine with Centrifugal Concentrator
(1).Central transmission shaft is driven by motor through belt, and then make the inner concentrate cone rotate in high speed.
(2).Fluidization water is introduced into the concentrate cone through central transmission shaft, and then spraying water to ring groove from inner cone holes, called backwash water. The water pressure level in separation process: 0.03-0.06Mpa.
(3).ineral materials enter into the inner cone groove by feeding pipe, under the high rotating configuration force, heavy ores will be deposited on the groove but the light ores will go upside along the cone liner, and finally going into tailing discharging
pipe from cone upper surroundings.During the separation process, make sure the concentration discharging pipe is closed.
(4).After a cycle process, close down the machine and open the concentration pipe to collect the gold concentration.

Product parameter of Mineral Sand Mining Recovery Machine with Centrifugal Concentrator

Type	BCJ20	BCJ30	BCJ60	BCJ80	BCJ100
Capacity (T/h)	0.2-1	2-8	10-40	35-70	75-120
Particle size (mm)	0-3	0-4	0-6	0-6	0-6
Feeding Concentration(%)	0-50%	0-50%	0-50%	0-50%	0-50%
Backwash water(T/h)	1.5-2	4-6	10-15	17-25	40-60
Output (KG/TIMES)	2-3	10-20	30-40	60-70	70-80
Power (kw)	0.75	1.5	4	15	18.5
Revolution (r)	800	600	460	400	360
Pressure Water (Mpa)	0.04	0.12	0.4	0.4	0.6
Dimension (mm)	930700900	118011401250	197016701750	230018002200	250020002400
Weight (kg)	205	400	1300	1500	2000

centrifugal concentrator gold recovery / centrifugal concentrator mining / centrifugal mineral concentrator

Company Information:About HENGCHANG

Hengchang headquarters is located in the industrial park in Gongyi City. It covers a total area of 150,000 square meters, including 100,000 square meters of standarized workshop. There are more than 200 sets of various large and medium-sized metal processing lathe, riveting machine, welding equipment and assembly equipment. We have more than 300 workers, including more than 20 middle and senior technicians. Hengchang is mainly focus on 4 series products: stone crusher machines, sand making equipment,
powder grinding mills, mineral processing equipment and their spare parts. Every year,

Hengchang can turn out 1,000 sets of crushers and 10,000 tons of crusher parts.

Customer Visit & Our Service

(A) Pre-sale services:

Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.

1. Select equipment model; 2. Design and manufacture products according to clients' special requirement;

3. Train technical personnel for clients;

4. Services during the sale;

(B)Provide considerate services to minimize clients' worries:

1. Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;

3. Train the first-line operators;

4. Examine the equipment;

5. Take initiative to eliminate
the troubles rapidly;

6. Provide perfect service;

7. Provide technical exchanges...

(C).After-sale services:Provide considerate services to minimize clients' worries:
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3. Train the first-line operators;
4. Examine the equipment;
5. Take initiative to eliminate
the troubles rapidly;
6. Provide perfect service;
7. Provide technical exchanges..

Our Workshop

1.We are factory and be able to give you the lowest price than market one;

2.Our products have been exported to over 80 countries and widely used in global mining and construction industry;

3.We have a professional after-sale service team to promptly and thoroughly solve your problems; 4. Provide free process design.

Packing and delivery

Packaging Details:We will make different packaging according to different machine sizes standard international export packing,container, wooden box.

Delivery Time:We will customize according to the actual needs of customers. Senior designers start to design the plan. After receiving the deposit, we will complete the delivery within 15 to 25working days.

FAQ

Q: For providing you the suitable quotation we need to know the following information:
A:
1. What is the raw material?
2. What is the capacity per hour you required ?
3. What is the maximum input size of the raw material ?
4. What is the final briquettes size and shape you want? Once we get your answers, I can provide you the best quotation immediately.

Remarks: The price will depend on different models.

Q: What about Warranty of the products ?
A:
Gongyi hengchang machinary grants our customers a twelve-month-period warranty from the date of delivery for machines exported from us. During the warranty period, in case any defect of material or workmanship occurred with spare parts in norma operation,we will at our discretion replace or repair the defective parts freely.