Crushing Equipment, buy Good Price Mining Double Two Stage Crusher Machine for Crushing Mineral Ores on China Suppliers Mobile

Product Details

Products Description

Double stage hammer mill crusher

The double stage hammer mill crusher can easily crush high-humidity materials such as coal gangue, shale, coal slag and other materials. Used as gangue and coal slag as additive and internal fuel for brick factory; using gangue and shale to produce standard brick and hollow brick.

Product Description

Working principle

When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the crushed products meeting the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area by the hammers for being re-crushed until they reached the required size. When the bulk material into the machine, hit by the hammerhead and stopped by material bracket. That's not only increase the contact area between material and hammerhead but also avoid sudden infarction of the rotor. After the impact, bulk materials hit themselves on the crushing cavity. Then the stones overflow from the straight screen or falling and been hammered again forming the stones. At last discharged from outlet of the hammer crusher.

Product Characteristics

The double stage hammer crusher is equivalent to two hammers broken into one, which is reasonably combined into a whole. Two sets of rotors are used in series and have the following characteristics: 1. Two rotors up and down crushing The two sets of rotors connected in series make the materials crushed by the upper rotor immediately crushed again by the hammer head of the lower rotor rotating rapidly. The materials in the inner cavity collide with each other quickly and crush each other to achieve the effect of hammer powder and powder powder. Unload directly. 2. There is no grate bottom, high-humidity material, and it will never be blocked The traditional grinder with grate sieve plate is not suitable for raw materials with a moisture content higher than 8%. When the raw material moisture content is higher than 10%, it is easy to cause serious blockage, so that the hammer head cannot rotate, the material cannot be discharged, or even burn A bad motor seriously affects production. The design of this machine has no grate bottom, no strict requirements for the moisture content of the material, and there is no problem of blocking the sieve plate, and there is no problem that the fine powder cannot be discharged in time, repeated crushing, so the crushing efficiency is high, and there is no hammer head. Invalid wear phenomenon.

Recommend Products

Jaw crusher

four roller crusher

impact crusher

Our Advantages

Hammer head

The weight of the hammer head can be customized according to thecustomer's requirements. The hammer head is made of new high-quality multi-element high chromium manganese steel composite casting, and its service life is several times that of the general hammer head.

Spindle

The material of the spindle is made of high quality alloy steel, which is processed by ultrasonic inspection for quenching and tempering.High strength steel carburizing heat treatment was used to improve the wear resistance of hammer disc and hammer hole.

Lining plate and strike plate

In order to prevent the abrasion of the frame, the inner wall of the frame is made of manganese steel. The striking plate is made of high-strength steel and quenched and strengthened. The superior abrasion resistance and impact resistance of the lining and striking plate are guaranteed.

Certifications

Hammer crusher CE Certification

ISO Quality System Identification

Motor CE certification

Product Paramenters

Model	SCP 600×400	SCP 600x600	SCP800×600	SCP 900×800	SCP 1000x800
Feeding Size ( mm )	≤100	≤150	≤200	≤260	≤400
Outlet Size ( mm )	≤3 (<2mm above 90%)	≤3 (<2mm above 80%)	≤3 (<2mm above 80%)	≤ 3 (<2mm above 80%)	≤3 (<2mm above 80%)
Capacity ( t/h )	15-25	15-30	50-70	50-90	60-120
Motor Power ( kw )	18.5+22	22+22	37+45	55+75	75+55
Dimensions ( L× W ×H ) ( mm )	2560×1020×1650	2760×1280×1750	3760×1314×2140	3870×1700×3150	4500×1700×3150