Mini floating fish feed pellet extruder machine is suitable to make dry and wet type fish food pellet (catfish, aquarium, Tilapia, Freshwater fish and tropical fish etc.)

1). Dongxing Brand floating fish feed processing line is used to produce the feed with novel shape, particular taste and color.
2). Scientific nutrition combination catches up the trend of the market.
3). In this line, you will see the advanced technology of haiyuan machinery. 

4). With simple operation, accurate parameter control, the products can be finished in the stipulated temperature, pressure, humidity and time.
5). Owing to the reasonable design, special materials ,the stability, repairs can be guaranteed and ensured.
6). The various shape and taste must meet the different requirements.

There is no need to heat outside the machine, through the screw extruding of the raw material, produces heat during the rotary working process, and gathers heat in the airtight environment to reach ripening, during the high temperature ripening process, the starch and fiber of the raw material become swell, on the pressure-tight condition, spray up from the mold outlet through the high pressure produced by the regular rotating of the screw, after cutting by the forepart cutter which rotates regularly and high-speedily, the finished product will be shrunk and become small average ball.   

Sample picture

↓

1). Use no impurities and hard materials (such as the purchase of small models of extruder, the need to process the material to be crushed to the size of rice in the processing.)

2). Before starting, straighten the head nut, the gear nut and the rear nut of the belt, tighten the belt.

3). Turn on the normal, only a small amount of slowly add the material to be out of the normal out of the material, immediately add a small amount of material, to be out of the expansion of the material after forming, and gradually increase the amount of feed, the amount of power to move in principle.

4). If you find the material at the feed level back up, because the beginning of the machine has not yet risen to the normal temperature, too much discharge, the material can not come in the material back to turn at this time should stop the material, Turn down and then put, must be continuous operation processing, 5 minutes later, the temperature increases.

5). Processing, such as the discovery of the material at the inlet or the expansion of the material into the agglomeration block back and turn, and smoke coke smell of water vapor, it is because the discharge is too small, caused by a sharp rise in temperature, such as severe congestion , Can not be cut, you can shut down and then removed, after cleaning in the boot.

6). After the end of processing, let the mechanical idle 15-30 seconds, to be inside the residual material after all the processing can be turned off the power, remove the head nut, screw, screw sets, remove the debris to clean to prepare for the next use.

* Inquiry and consulting support. 

* Sample testing support. 

* View our Factory.

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Gongyi Dongxing Material Trade Co., Ltd. is located in Gongyi City and is specialized in manufacturing mechanical equipment, chemical products and water purification materials.
With an experienced and professional team, we have exported our products to many countries and regions all over the world, especially Europe, South America, and the Middle East. Our products enjoy a good reputation among our customers.
We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

91.8% Response Rate

91.8% Response Rate

91.8% Response Rate

Company uphold: honesty, quality first, customer first for the purpose.