Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

CM400RGICH1ACB

switch adds kVA(h) and kvar(h) measurement capability. N2 Soft-switch - The Demand (N2 ) Soft-switch adds billing demand calculations. Q2 Soft-switch The Power Quality Measurements Soft-switch enables - Voltage (L-N): VA (max, min, store) for summations, demand, and load profile recording - RMS voltage measurement for reading and display - Low potential caution R2 Soft-switch - The Load Profile Soft-switch activates up to 4 channels of LP recording T2 Soft-switch The Time-of-use Soft-switch enables TOU operation - Up to four TOU periods and four Seasons - Up to three daily rate schedule types and one holiday schedule - Up to 80 TOU schedule set points - Up to 50 programmable dates: - Holidays, season changes, Daylight Savings Time (DST), self-read, and demand reset - Perpetual calendar handles most dates - Up to two billing and two demand measures per TOU period - Self-read actions on specified dates, with or without a demand reset V2 Soft-switch - The voltage Soft-switch activates Sag/Swell monitor and recording Accuracy Typical Accuracy: Within +/- 0.2% Starting Watts: 12W @ 240V, 6W @ 120V Typical Watt Loss: 0.7 Watts Rating Voltage: 120 V –240 V Current: Class 100, Class 200, Class 320, Class 20 Frequency: 50 or 60 Hz Cover Options Polycarbonate cover with molded sunshield - Plain cover without RESET OR “D” ring - With Optocom “D” ring - With RESET latch and Optocom “D” ring Operating Range Voltage: +/- 20% Operates over a broad temperature range (–40°C through +85°C) Available Models ANSI Form 1S, 2S, 3S, 4S, 12S, 25S CL 20, CL100, CL200, CL320 Applicable Standards Performance meets or exceeds industry standards ANSI C12.19 ANSI C12.1 ANSI C12.10 ANSI C12.20 ANSI C37.90.1 I-210+c Basic Functions Basic function as electronic single phase Revenue Meter Four Energy options (Delivered, Received, Delivered+Received, Delivered-Received) Tamper detect capability Broad communication module options Network applications Models available for 120 or 240 volt CL 20, CL 100, CL 200, CL 320 applications. 50 or 60 Hz operation. Optional Functions Factory integrated Service Switch Capability - Soft Switch Functions - AMR/AMI Communications (AMR/AMI Interface formats include quadrature pulse, PSEM, SPI Format-1 data, SPI Format-2 Data) - Display AMR calculated Demand value shown on the lower 3 LCD digits - Simple Voltage Event monitoring in addition to RMS momentary voltage display Accuracy Typical Accuracy: Within +/- 0.2% Starting Watts: 12W @ 240V, 6W @ 120V Typical Watt Loss: 0.7 Watts Rating Voltage: 120 V –240 V Current: Class 100, Class 200, Class 320, Class 20 Frequency: 50 or 60 Hz Cover Options Polycarbonate cover with molded sunshield - Plain cover without RESET OR “D” ring - With Optocom “D” ring