MINI-100N Laboratory Nitrogen Sample Concentrator with LED Display      

 

Product description: 

The nitrogen sample concentrator MINI-100N is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously.

 

Product Features

1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.

2. The position of gas needle in air chamber plate can be adjusted to suit for different types of tubes.

3. The height of the air chamber plate can be adjusted. The length of a standard gas needle is 150mm.

4. Separately blow of 6 needles and flow regulating of each needle are available to avoid gas waste.

5. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

6. Built in overheat protection, automatic fault detection and fault beep alarm devices.

7. LED display immediate temperature and diminishing time. Operation is simple and convenient.

8. Standard configured air cavity and adjustable bracket. 

 

Technical Parameter 

 

Model	MINI-100N
Temp. Range	R.T.+5℃—100℃
Heating Time	≤12min (From40℃ to 100℃)
Temp. Accuracy (40~100℃)	±0.5℃
Temp. Accuracy(100~150℃)	±1℃
Temp.Stability(100℃)	±0.5℃
Blocks Quantity	1 Block
Time Range	1s ~ 999s or 1min ~ 999min
Nitrogen Flow Rate	0—10L/min
Nitrogen Pressure	≤0.1MPa
Power	60W
Dimensions(W×D×H)	W.110 x D.156 x H.400 mm
Blocks Selection	Refer to “Exchangeable blocks”

 

Blocks replacement for MINI-100N

Blocks can be optional and exchanged.Optional flow regulating valve.

Cat#	Tube Quantity &  Dia.of hole
MiniP-C	6 x φ15mm
MiniP-D	6 x φ16mm
MiniP-F	Customized

 

                                                                                                                                            Please send inquiry>>

                                       If you need any detail packing information, please contact us>>

                                                                       If you have any question, please contact us>>