Multi-parameter water quality meter is one meter with several measuring unit. It can measure simultaneously pH/pX, Ion concentration, ion electrode potential (mV) value, Condutive (conductivity, TDS, salinity), DO (concentration and saturation) and temperature, etc. 

It is suitable in the field of disease control, environmental protection, water quality analysis, biological agriculture, scientific research and higher education, etc.

We Can Supply All Kinds Of Water Analysis Instrument To Meet Different Demands. Inquiry us to chooes the best one for you.

 

Features For M510T-A portable multiparameter water quality meter

 

* Color High contrast LCD touchscreen, 4.3 inches.

* Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc.

* Multi-reading feature allows auto-read, timed-read and continuous-read. 

* Automatic/Manual temperature compensation ensures accurate results.

* Auto-hold feature senses and locks the measurement endpoint.

* Data Storage 1000 sets for each parameter (GLP-compliant).

* Data analysis feature helps user review, compare and recalculate results.

* Support for USB communication.

* Auto-power off feature effectively extends the battery service life.

* Reset feature automatically resumes all settings back to factory default options.

* IP65 waterproof.

 

pH

* 1-8 points calibration with Standard Recognition.

* Selectable pH buffer groups, including USA, NIST, DIN, GB, MERK, JIS.

* User-defined pH buffer or buffer group is supported.

* Automatic electrode diagnosis with pH slope and offset display.

 

Ion

* 1-6 points calibration.

* Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.

* Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.

* Over 10 methods are built-in, including F^-, Cl^-, Br^-, I^-, NO₃^-, BF₄^-, NH₄⁺, K⁺, Na⁺, Ca²⁺, Cu²⁺, Pb²⁺, Ag⁺ and etc., user-defined method is supported.

 

Conductivity

* 1-5 points calibration automatically recognizes the standard solutions.

* Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.

* Temperature compensation type (none, linear, pure water).

 

 

Model		M510T-A
Parameters		pH/EC/ISE/Temp. (mV/ORP/pX/Resistivity/TDS/Sal.)
pH	Range	-2.000 to 20.000 pH
	Resolution	0.1, 0.01, 0.001pH
	Accuracy	±0.002 pH
	Calibration Points	Up to 8
	Standard Customization	Yes
	Calibration Reminder	Yes
	Standard Recognition	USA, NIST, MERK, JIS, GB and DIN buffers
	Slope Limit	Yes
mV/ORP	Range	-2000.00 to 2000.00 mV
	Resolution	0.1, 0.01 mV
	Accuracy	±0.1 mV or ±0.03%
	EH ORP Mode	Yes
	ORP Calibration Points	1 custom point (relative mV)
pX	Range	-2.000 to 20.000 pX
	Resolution	0.1, 0.01, 0.001 pX
	Accuracy	±0.002 pX
	Calibration Points	Up to 6
ISE	Range	1E-9 to 9.999E9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L
	Resolution	Up to 4 significant digits
	Accuracy	±0.3%
	Calibration Points	Up to 8
Conductivity	Range	0.000 μS/cm to 3000 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±0.5% FS
	Reference Temperature	5, 10, 15, 18, 20, 25 ºC
	Calibration Points	Up to 5
	Calibration Reminder	Yes
	Standard Recognition	10μS/cm, 84μS/cm, 500μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity	Range	5.00 Ω·cm~100.00 MΩ·cm
	Resolution	0.01 Ω·cm minimum
	Accuracy	±0.5% FS
TDS	Range	0.000mg/L~1000g/L
	Resolution	0.001mg/L minimum, changed with range
	Accuracy	±0.5%
Salinity	Range	(0.00~8.00)%
	Resolution	0.01%
	Accuracy	±0.1%
Temperature	Range	-10 to 135 ºC, 14 to 275 ºF
	Unit	ºC, ºF
	Resolution	0.1
	Relative Accuracy	±0.1
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	1000 Groups
	GLP Features	Yes

PH Meters	Titrator	Turbidimeter