1.Feature and Description

0.1mm resolution, 128 × 64 dot matrix graphics LCD screen, can store 500 thickness values, high / low limit alarm, minimum capture, two-point calibration, V path correction, mm / inch, EL backlight, The

The unique penetrating coating function is used to measure the net thickness of the substrate without removing the paint layer. (UM-1D can only choose one kind of probe)

 

Schematic Diagram of Through Coating Function

2.Picture for Our product

It is very suitable to measure corrosion pipe 

Each machine is calibrated by 34 standard blocks to ensure measurement accuracy

3.Usage and Application

UM series of ultrasonic thickness gauge is the pioneer of Zhengzhou NANBEI equipment company developed and produced by ultrasonic measurement principle, is a very small measuring instruments. It can be fast, no damage, accurate measurement. The instrument can be widely used in manufacturing, metal processing industry, chemical industry, commercial inspection and other testing areas, suitable for ultrasonic waves can be a constant speed in its internal transmission, and can be reflected from the back of a variety of material thickness measurement The In addition to a variety of sheet and a variety of processing parts for accurate measurement, but also on the production equipment in a variety of pipes and pressure vessels to monitor them to monitor the use of corrosion in the process of reducing the extent of material protection is essential Special equipment.

4.Technical data

Display screen	128 x 64 dot matrix LCD display (EL backlight)
working principle	Pulse-echo mode (standard mode for general thickness measurement) Echo-echo mode (coating mode, for the removal of the paint layer of the substrate net thickness measurement)
Measuring range	0.8 - 300mm (standard mode) 3 - 18mm (coating mode, using standard probe) Coating thickness less than 2mm Depending on the probe used, the measured material, the surface condition
	The lower limit of measurement of pipe (steel): 20mm×3.0mm(PT08 Probe), 15mm×2.0mm(PT06 Probe), Indication error does not exceed ± 0.1mm
Indication error	The lower limit of the measuring range is 10mm (including 10mm) :±0.1mm 10mm to the upper limit of the measuring range :±(1%H+0.1) mm Note: H is the actual thickness of the measured object
Resolution	0.1mm or 0.001mm
Repeatability	0.1mm
Unit	mm or inches
Calibration mode	Zero calibration, two-point calibration
V path correction	Automatic V sound path correction, compensation for dual crystal probe non-linearity
Measure the update rate	4Hz
Measure the update rate	1000~9999m/s or 0.0394~0.3937in/us
Storage function	Divide 5 arrays to store 500 thickness values
Minimum capture	Capture the minimum value in the measurement process
Alarm function	Can set the thickness limit, the measured value outside the threshold alarm sound
Sound speed storage	Can store the sound velocity of 5 different materials
Working languages	Choice of Chinese or English
Communication Interface	USB interface or RS232 serial port (optional)
Application software	UmView software for measuring, storing, analyzing and editing data (optional)
power supply	Two 1.5V AA batteries, when the battery is low, there is a low voltage prompt
Operating time	Alkaline batteries can be used for up to 200 hours (without backlighting)
Automatic shut-down	5 minutes after no operation automatically shut down
Operating temperature	-10C~60C,up to -20 C(special requirements)
Size:	149mm×73mm×32mm
Weight:	160g(without battery)

5.Packing and Shipping

6.Related Product

 

Model	UM-1	UM-1D	UM-2	UM-2D
Operating Principle	Pulse-Echo	Pulse-Echo Echo-Echo	Pulse-Echo	Pulse-Echo Echo-Echo
Measuring Range in Standard Mode	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)
Measuring Range in Thru Coating Mode	×	3mm-20mm	×	3mm-20mm
Measuring Resolution	0.1mm, 0.001inch	0.1mm, 0.001inch	0.01mm, 0.0001inch	0.01mm, 0.0001inch
Probe Compensating Line	1 built-in probe compensating line	1 built-in probe compensating line	7 built-in probe compensating line	7 built-in probe compensating line
Data Logger	√	√	√	√

 

UM-1 ultrasonic thickness gauge   UM-1D ultrasonic coating thickness hauge
UM-2 ultrasonic thickness gauge   UM-2D ultrasonic coating thickness hauge

 

Other types

Magnetic Method (Fe): Measuring the thickness of non- magnetic coatings on steel, iron and other ferromagnetic metal substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, phosphate coating, chromium, zinc, Aluminum, tin and cadmium, etc.
Eddy Current Method (NFe): measuring the thickness of non-conductive coatings on copper, aluminum, stainless steel and other non-ferromagnetic substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, oxide film and phosphate film, etc.

Model	CM10F	CM10N	CM10FN	CM10FH
Measuring Principle	Magnetic	Eddy Current	Magnetic/Eddy Current	Magnetic
Measuring Range	0-3000μm	0-2000μm	0-1500μm	0-10000μm
Low Range Sensitivity	0.1	0.1	0.1	1
Tolerance(μm)	±(2%H+2)	±(2%H+2)	±(2%H+2)	±(2%H+10)
Min. Curvature Radius	5	5	5	10
Min. Measuring Surface	20	20	20	40
Min. Substrate Thickness	0.5	0.5	0.5	2

Picture
Application

1.Company Show

2.Factory Show

 

1.Certification

2.Warranty and After-sale service
♥♥We Supply 1 Year Warranty , And Lifelong Free Technical Guiding And Training♥♥