The tester primarily reacts to the increase in acidity of oil. As the oil degrades, it becomes more acidic and will begin to pit metal engine partsThe red LED #10 reading usually means that the level of acid in the oilhas reached a maximum acceptable level, and the oil should be changed.owever,other contaminants( such as dirt, soot, water, antifreeze andmetal particles )also influence the reading Water or antifreeze in the oimay indicate a bad seal or head gasket Metal particles result from unusual wear of bearings, pistons, rings, etc. Excessive carbon or sootmay be caused by poor compression and excessive blow-by Fuel leaking can dilute the oil and may cause an artificially good oil quality reading. If test results show that oil quality does not drop as expected
over time, or seems to improve, check engine for fuel leaks. Try a dropof oil on paper. Look for a gray ring. )If a significantly worse oil rating than expected is displayed, we recommend having the engine checkedor send a sample to an oil laboratory for analysis

TROUBLE SHOOTING

#10 LED lights constantly after the tester is tumed on.
The button cells are low. Replace the button cells with two new button cells of the same type ( 3V button cell, CR2032 or equivalent. 

#7-8-9 LEDs flash in turn
The sensor is dirty, or you added oil on the sensor before turning on the power switch.

My old oil tests like new.
The sensor was not cleaned well before the test, or your oil may not be
as bad as you think. Some oil can last over 10000 miles.

My test results are inconsistent.
Make sure that the surface of each oil sample under test reaches the
required height as indicated in Figure 2. Sensor must be well cleaned
after each test.

Packing:

Blister Packing, 50 pcs/Carton

Carton size:37 X 31 X 13 CM/ Weight: 4kg

Shipping:

Sea Port: Xiamen Port

Air Shipping: DHL, Fedex, UPS, China post, EMS 

We can ship out the order in 1 working day after the parment clear for items we have in stock. 

We are OEM & ODM Manufacturer

EASTERN technology group is a "State High and New Technology Enterprise" which specializes in research, manufacture and sales of test & measurement instruments. We have strong production ability and plenty of manufacture experience, as a result of long-term cooperation with many world famous brand customers and manufacturers.

Q: Are you factory manufacturer or trading company?

A: We are manufacturer, our factory--Eastern Intelligent Meter established on 1993, focus on test and inspection instrument. We have a better price than trading company. 

Q:What is your MOQ?

A:The MOQ is 1 for products which we have in stock. If you need make customize, print your logo, please contact us for MOQ, because different product have different MOQ.

Q: How can I get your price for bulk order? 
A:Please feel free to contact us on trademanager online or send us an inquiry, then we can discuss the detail.

Q: Can I print my logo on product and packing?
A: Yes,we have the neutral and our brand product in stock,if you need make customize,please contact us for the detail.

Q:What are the terms of payments you offer?

A:For small orders, we prefer pay by credit card and make deal by Trade Assurance. VISA and Mastercard are all OK.For bulk order,TT is a good choice.

Q:What is your lead time?

A:For product which we have in stock, we can send out in 1 working day. But it take time from our factory to shipping agent, the tracking number may update 3-5 days after we send out.