Pale Yellow Liquid Wear Resistance Oil Sulfur Silane Si69(Z-6940) silano

 

Chemical Name: Bis [3-(triethoxysilyl) propyl] tetrasulfide

Chemical Formula :(C₂H₅O)₃SiCH₂CH₂CH₂-S₄-CH₂CH₂CH₂Si(OC₂H₅)₃

CAS NO: 40372-72-3

Physical Properties: Silane coupling agent Si-69 is a pale yellow clear liquid with light odor of ethyl alcohol and soluble easily in ethyl alcohol, acetone, benzene, toluene etc. Insoluble in water.

Synonyms: SI-669/SI-69/Z-6940/KH-8454/A-1289/Y- 6194/KBE-846/JH-S69

 

 

Product Specification:

Properties	Units	Target Values(Spec,Limits)
Alcohol content	%(wt)	≤0.5%
CLPTES Content	%(Wt)	≤3.0%
Other impurity content	%(Wt)	≤1.0%
Viscosity 25°C (cps)	Cps	≤14.0
Sulfur Content	%(wt)	22.5(21.7-23.3)
Average chain Length		3.70(3.55-3.85)
S2 content	%(rel.wt)	18.0(15.0-21.0)
S3 content	%(rel.wt)	30.0(27.0-33.0)
S4 content	%(rel.wt)	24.0(21.0-27.0)
S5 to S8 content	%(rel.wt)	27.0(24.0-30.0)
Volatility (100°C /10min.)		≤ 1.0%
Specific Gravity (25°C)		1.080 ± 0.020
Refractive Index (25°C)		1.480 ± 0.020

CLPTES : g-chloropropyltriethoxy silane.

 

Application:

Silane coupling agent si 69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products.

Silane coupling agent si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. Silica, talc powder, mica powder and clay can be used in combination with TS-69 in polymers such as NR, IR, SBR, BR, NBR and EPDM.

 

Recommend Dosage:

1.0-4.0 PHR

 
 

Product Information

 

Product Code	Specification	Properties
Crosile-69 Bis[3-(triethoxysily)propy] tetrasulfide CAS NO: 40372-72-3	Appearance : Pale yellow clear liquid Alcohol Content % : ≤0.5 V2 Content % : ≤3.0 VIscosity 25°C cp s :≤14 Sulfur Content % : 22 ± 1 Specific Gravity(25°C ) : 1.080 ± 0.020 Refractive index(25°C ) : 1.480 ± 0.020	TS69 as Tera-Sulfide slilane forms covalent bonds between rubber and fillers Increase physical preparer and optimized dynamic properties. Reducing rubber viscosity, etc.
Crosile-69B 50% activity predispersion polymermaster batch	Appearance : Light yellow granular Specific gravity(°C) : 1.25±0.1 Ash Content % : 11.5±1 Heating loss in 105°C : ≤5.0%	TS69B can offer good dispersion and easy-weighting, good processability; same properties with TS69.
Crosile -69C 50% Liquid TS69 with 50% Carbon Black N330	Appearance : Black Granular Sulfur Content % : 12 ± 1 Insoluble Content in butanone % : 52±3 Ash Content % : 11.5±1 Heating loss in 105°C : ≤2.0%	TS69C easy weight adn better processing; same properties with TS69
Crosile -75 Bis[3-(triethoxysilyl)propyl]disulfide CAS NO: 56706-10-6	Appearance : Light yellow clear liquid  Alcohol Content % : ≤0.5 V2 Content% : ≤0.3 VIscosity 25°C cps : ≤12 Sulfur Content % : 15 ± 1 Specific Gravity(25°C ) : 1.040 ± 0.020 Refractive index(25°C ) : 1.460 ± 0.020	DS75 has a low active disulfide functional group More considerable scorch safety than TS69. Same properties with TS69 in the rubber compound.
DS-75C 50% Liquid DS75 with 50% Carbon Black	Appearance: Black Granular Sulfur Content % : 7.5±1 Insoluble Content in butanone % : 52±3 Ash Content % : 12-13 Heating loss in 105°C : ≤2.0%	DS75C, easy weight and better processing sameproperties with Silane DS75.
Crosile -1891	Appearance : colorless clear liquid Alcohol Content : ≤1.0% Specific Gravity(25°C ) : 0.980 ± 0.020 Refractive index(25°C ) : 1.430 ± 0.020	TS 1891 can markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. It can reduce the viscosity and improve the processability of rubbet products
Crosile -172 Vintri(2-methoxyl ethoxyl) silane CAS NO:2487-90-3	Appearance : Colorless clear liquid VS172 Content % : minimum 98 Specific Gravity(25°C ) : 1.040 ± 0.020 Refractive index(25°C ) : 1.430 ± 0.020 Chlorine content : ≤15ppm	A. Used in curing EPDM,BR,PET,EP,PP etc. B.Carry out heat curing under normal pressure and improve the efficiency of extrusion molding in wire and cable field. C.Used as an adheasion accelerator for rare adhesive polyolefin materials (PE and PP) and special rubbers (silicone, fluorine and chloroprene rubber) D. Modified hydroxide as acatalyst, without halogen flame retardants. which resolved question ofthe ultrafine particle coalescence and dispersion uneven

 

 

Our technical and quality control departments equip a lot of advanced test instruments to guarantee the consistent quality and stable supply, as well as offer technical service to our clients.

 

Application Scenarios

 

  

 

 

 

♦ Types and quantity of ingredients are in accordance with industry standard
♦ Supply ability:

1. Precipitated Silica ZC-185 and ZC-185GR (Zhengsheng Inorganic Marterial)	120,000,00 MT/year
2. Silane Coupling agent Si69,Si75,X-50S (Ecopower(YongXIU))	7,000,00 MT/year
3. Gum Rosin and Rosin Ester	80,000,00 MT/year
4. CSM rubber (Hypalon rubber)	3,000,00 MT/year
5. Hydrocarbon resin C5 and C9	12,000,00 MT/year

 

 

 

• "Quality assurance, delivery on time" is our service creed and we are striving to keep that in our mind all time. "Attitude,Practical,Teamwork" are our working style and look forward to offer excellent quality with best service to our client.

• There are Five owner factories are located in Fujian,Jiangxi,Guangdong,JiLin province,Tianjin.We committed to providing customers with quality products and quality services, good reputation to win customers trust.

 

 

Exhibition

 

Rubber Tech Exhibition

 

 

 

 

Market Distribution

 

 

Packaging
1. 25kg/drum, 200kg/drum, 1000kg/IBC.
2. Shelf life: (Original Unopened containers, Stored dry, between +10°C and +40°C): 12.0 months

 

     

 

 

FAQ

 

Question 1: How many payment terms do you support?
A: L/C,D/A,D/P,T/T,Western Union, Money Gram payments for offline orders. etc.

Qusetion 2: Do you have factory?
A: We have our own factory located in Xinghuo Industrial Park, Yunshan country of Jiangxi Province, which can supply 7000 metric tons sialne coupling agent to satisfy the need of our clients.

Guidance for Inquiry
For our faster and more accurate reply, please write these information in the inquiry:
1.Product name;
2.Purity
3.Inquiry volume;
4.Application;
5.Destination Port;
6.Other Requirements.
This will save valuable time for both of us, and our best price can also be provided for you quickly according to your exact information. Thanks for your understanding!
Now please send your inquiries to us and enjoy our professional service!