Our main products are RDP, HPMC, Water repellent, Water reducer, PP Fiber, Calcium Formate, Mortars, etc. Our annual output of RDP is 36,000 ton, which is the biggest manufacturer in Asia region.

SETAKY®  WALL'S EXTERNAL COATING AND PLASTERING

Product Description:

One component, pre blended, cement based outdoor wall plaster which, when mixed with water, is used prior to the application of finish coating,durable fillers,suitable for outside projects.Durable fillers,fill cracks and splits on exterior surfaces.

For repairs to plaster, brick, stone, wood, can be nailed or screwed when dry. Quick hardening, non-shrink.

Characteristic:

· Easy to use, just mix it with water

· Excellent weather resistance

· Good application ability, easy to apply and polish

· Good water-resistant and water vapor transmission ability

· High adhesive strength

· Good match with substrate and finish coating

· ISO9001 quality management system

· Green building material certificate

Field of application

· Suitable substrates: cement mortar, concrete

· Gypsum board, Magnesium oxide board and building material board

· Exterior for building

Limits of use

· Not suitable to use on oil substrate

· Not suitable to shrinkable substrate

Executive Standard

JG/T229-2007 « Waterproofing flexible putty for exterior thermal insulation systems>>

Technical Data

Tools:

Electric-mixer, Bucket, Trowel

Substrate preparation

· Clean the substrate until free from dust, oil, or any other stains

· When high temperature season or dry substrate, substrate should be wet one day before

Application

· Put 8~9 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water

· Mix properly until homogeneous and lump-free

· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat.  Each thickness is about

  0.5~0.6 mm

· Ensure a flat, smooth and pinhole free coating

· Normally, after 24 hours (depend on weather and substrate), polish the surface

· After that, apply the finish coating

Application environment

· Temperature: 5°C~35°C

· Avoid rain, high temperature and frost

· Avoid direct sunlight or strong wind

Safety

· May cause serious damage to eyes

· May be sensitive to skin in case of contact. Irritable for eyes, respiratory system and skin

· Keep out of the reach of children

· Avoid breathing the dust

· In case of contact with eyes, rinse eyes immediately with plenty of water and consult a doctor

· Wear suitable protective clothing, gloves and eye/face protection

Shelf life & storage

12 months after manufacturing date in dry ventilated place

We offer free sample for test.Warmly welcome

your enquiry and visit. Thanks in advance!