Hand Protection, buy Chemstop Unsupported Black Neoprene Chemical Resistant Gloves on China Suppliers Mobile

Product Details

Long Cuff Green Flock Lined Nitrile Glove China Industrial

Product Description

BGNEC001: Neoprene,has good abrasion and cut resistance, while resisting the effects of aging, sunlight, ozone, oxidation and weather. Also flame resistant, it demonstrates heat stability up to 93°C (200°F). Our heavy-duty Neoprene gloves are resistant to a broad range of oils and chemicals that attack natural rubber gloves. They provide excellent protection from acids, caustics, oils, grease, and many solvents. Gloves are 30 cm. (12") in length, 20 mil,22 mil,25 mil and 28 mil thick for added protection, and flock lined to absorb perspiration.

Technical Specs

Material:	100% Flock Lined,Neoprene	Color:	Black
Liner:	100% Flock Lined	Cuff:	Guantlet Cuff
Coating:	Neoprene rubber	Size:	30-31 cm
Coating Style:	Smooth finished	Packaging Inner Pack:	12 Pairs/PP bag
Thread Type:	Flock Lined	Country Of Origin:	China

Glove Sizing

Width Measurement: Wrap a tailors measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Length Measurement: Measure from the bottom edge of your palm to the tip of your middle finger to determine your "finger length" size.

Packaging

1 pair/bag, 120 pairs/carton

Features:

1,Resistant to Nitric Acid up to a concentration of 10%;

2,Good abrasion and puncture resistance,Lint-free, fine-gauge nylon knit is soft, flexible,hard-wearing;

3,Black color combo hides dirt and stains for longer wear;

4,Ergonomic hand shape reduces fatigue;

5,Choice of uncoated backs for breathability;

6,This glove is Solvent Resistant (methanol, n-heptane);

7, Resistant to Hydrochloric Acid up to a concentration of 36%;

8, Resistant to Sulphuric Acid up to a concentration of 50%.

Applications:

Automotive,Oil Refineries, Petrochemical,Electronics,Plastics .

GLOVES COATING MATERIALS

Coating materials include natural rubber or latex, synthetic rubber, and plastics.

1. Natural Rubber
2. Synthetic Rubber
Chloroprene (Neoprene) / Nitrile rubber / Butyl and Viton®-butyl
3. Plastics
Polyurethane / Polyvinyl chloride

Natural Rubber also known as Latex is found in nature in over 200 plants, but its most common source is the Hevea Brasiliensis tree. Natural rubber dispersed in water is known as latex. Natural rubber has a very high elasticity compared to other glove materials, excellent cut and tear resistance, and outstanding grip and temperature resistance. While it is flexible and durable over a wide range of temperature, -18 to 149°C (0 to 300°F), it has poor flame resistance. In general, natural rubber withstands water, alcohols, and some ketones, but has poor chemical resistance against most hydrocarbon and organic solvents. Natural rubber can cause an allergic reaction in some people.

Nitrile Rubber is a co-polymer of acrylonitrile and butadiene. Nitrile rubber offers excellent physical hazards resistance to punctures, cuts, snags, and abrasion. While it is not flame-resistant, it demonstrates functional performance in temperatures ranging from -4 to 149°C (25 to 300°F). Nitrile rubber has considerable resistance to oils, fuels, and certain organic solvents. It is commonly used as a coating for dipped gloves and also in the construction of laminated and impregnated, cut and sewn gloves.

Polyurethane (PU) is a thermoplastic polymer of urethane. Polyurethane provides good abrasion resistance and tensile strength. Polyurethane offers good resistance to oils, some organic solvents, oxidation and ozone. It has poor resistance to hot water and is not recommended for use above 79°C (175°F). Polyurethane has a very low particulate shed, thus making it a good choice for cleanroom gloves. Polyurethane is also used in some specialty application styles and as a waterproof liner for gloves.

Polyvinyl Chloride (PVC) is a synthetic thermoplastic polymer of vinyl chloride. PVC offers good abrasion resistance but may be susceptible to punctures, cuts, and snags. While it is flexible, it does not provide the tactile sensitivity associated with most rubber products. PVC starts to soften at approximately 82°C (180°F). PVC is effective against water and most aqueous solutions, detergents, and diluted bases and acids. It only has limited chemical resistance to organic solvents. PVC is one of the more common coatings for coated work gloves.