Hand Protection, buy 500 degree Aramid Woven Fabric Heat Resistant Construction Gloves on China Suppliers Mobile

Product Details

500 degree Aramid Heat Resistant Gloves Woven Fabric Construction Gloves

Product Description

BGKH004:100% Aramid Woven Fabric And Aramid Terry Knitted Fabric, 7.70mm Thickness, 190gram Per Pair. Maximum 500 Degree Celsius Heat Resistant Gloves,500 degree Aramid Heat Resistant Gloves Woven Fabric.

Technical Specs

Material:	ARAMID FIBER Terry	Color:	Yellow
Liner:	No	Hemmed:	No
Max Heat Level:	500°C	Hem Color:	Roll hem
Cuff:	ARAMID FIBER woven fabric cuff	Packaging Inner Pack:	1 Pairs/PE bag
Size:	38 cm long	Country Of Origin:	China

Glove Sizing

Width Measurement: Wrap a tailors measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.

----------

Length Measurement: Measure from the bottom edge of your palm to the tip of your middle finger to determine your "finger length" size.

Packaging

1 pairs/bag, 30 pairs/carton

Features:

1,Heat Protection Of Up To 500°C;

2,Good Thermal Protection. Self-Extinguishing ARAMID FIBER (Flam Dies Out);

3, Long ARAMID FIBER Woven Fabric Cuff Add Extra Protection And Comfort;

4,Superior Cut Resistance Gloves Are Ideal For Handling Sharp Or Rough Metal Objects.

Applications:

Medium To High-Heat Applications, Foundries,Steel Mills,Glass Handling,Automotive And General Appliance Industries, Heating And Air Conditioning Manufacturing, Metal Stamping Operations, Ceramic Plants, Bakeries And Other Applications Requiring Moderate Heat Protection.

GLOVES COATING MATERIALS

Coating materials include natural rubber or latex, synthetic rubber, and plastics.

1. Natural Rubber
2. Synthetic Rubber
Chloroprene (Neoprene) / Nitrile rubber / Butyl and Viton®-butyl
3. Plastics
Polyurethane / Polyvinyl chloride

Natural Rubber also known as Latex is found in nature in over 200 plants, but its most common source is the Hevea Brasiliensis tree. Natural rubber dispersed in water is known as latex. Natural rubber has a very high elasticity compared to other glove materials, excellent cut and tear resistance, and outstanding grip and temperature resistance. While it is flexible and durable over a wide range of temperature, -18 to 149°C (0 to 300°F), it has poor flame resistance. In general, natural rubber withstands water, alcohols, and some ketones, but has poor chemical resistance against most hydrocarbon and organic solvents. Natural rubber can cause an allergic reaction in some people.

Nitrile Rubber is a co-polymer of acrylonitrile and butadiene. Nitrile rubber offers excellent physical hazards resistance to punctures, cuts, snags, and abrasion. While it is not flame-resistant, it demonstrates functional performance in temperatures ranging from -4 to 149°C (25 to 300°F). Nitrile rubber has considerable resistance to oils, fuels, and certain organic solvents. It is commonly used as a coating for dipped gloves and also in the construction of laminated and impregnated, cut and sewn gloves.

Polyurethane (PU) is a thermoplastic polymer of urethane. Polyurethane provides good abrasion resistance and tensile strength. Polyurethane offers good resistance to oils, some organic solvents, oxidation and ozone. It has poor resistance to hot water and is not recommended for use above 79°C (175°F). Polyurethane has a very low particulate shed, thus making it a good choice for cleanroom gloves. Polyurethane is also used in some specialty application styles and as a waterproof liner for gloves.

Polyvinyl Chloride (PVC) is a synthetic thermoplastic polymer of vinyl chloride. PVC offers good abrasion resistance but may be susceptible to punctures, cuts, and snags. While it is flexible, it does not provide the tactile sensitivity associated with most rubber products. PVC starts to soften at approximately 82°C (180°F). PVC is effective against water and most aqueous solutions, detergents, and diluted bases and acids. It only has limited chemical resistance to organic solvents. PVC is one of the more common coatings for coated work gloves.