Continuous Casting Machine

 CCM radius: from R2m to R12m

Rounds diameter: 80-320sq.mm
Strand No.: from 1 to 8
Billet length: 3-12m

1. Equipment foundation and civil works                11. Dummy bar
2. Steel structure platform                                       12. Dummy bar storage device
3. Casting radius                                                       13. Withdrawal straightening machine
4. Strand number                                                     14. Approach roller table
5. Ladle support                                                       15. Automatic cutting machine
6. Tundish                                                                16. Transmit roller table
7. Tundish car                                                         17. Cooling bed
8. Mould                                                                   18. Pusher
9. Oscillation device                                               19. Hydraulic system
10. Secondary cooling system                                20. Computer and PLC system
21. Tundish roaster

The billet continuous casting machine can be designed as curved and vertical-bend according to the users requirements. It can cast carbon steel, alloy steel and special steel, such as stainless steel. Automatic hydraulic control, automatic secondary cooling water distribution, compressed air-water cooling system. Technical support, design, feasibility report, manufacturing, erection and commissioning, cooperate with special institution, and our own engineer team, we do not only export the machinery, but also run the factory.

1. Strip plate mould of the entirety copper-tube mode which is simple and low cost.
2. High-frequency and small-swing plate spring vibration, the depth of vibration mark is under 0.2mm.
3. The simplified billet guiding device is low cost and easy maintenance.
4. Five-roller and four-drive straightening machine is of the large straightening.
5. Auxiliary straightening machine can re-straighten the billet in emergency.
6. Stainless steel cutting machine can cut-to-length accurately.
7. The coping rate in the surface is less than 5%.
8. Computer and PLC system
9. Tundish roaster