HDPE sheet, buy Factory price PE material hard plastic sheet HDPE sheet 1mm thickness on China Suppliers Mobile

Product Details

Product Description

Factory price PE material hard plastic sheet HDPE sheet 1mm thickness

As a thermoplastic sheet manufacturer in China, Henan Yiqi Plastic can supply both single color and dual-color HDPE sheet to suit clients' demands. Henan Yiqi Plastic own the most advanced extrusion machines to extrude HDPE sheet with fixed material under certain pressure and temperature.

HDPE sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE sheet will need to be physically or mechanically.

High density polyethylene (HDPE) material

High density polyethylene (HDPE) is a white powder or granular product. Non-toxic, odorless, crystallinity is 80%~90%, softening point is 125~135°C, use temperature can reach 100°C; hardness, tensile strength and creep are better than low density polyethylene; wear resistance, electricity Good insulation, toughness and cold resistance; good chemical stability, insoluble in any organic solvent at room temperature, resistant to corrosion by acids, alkalis and various salts; low permeability of water to steam and air, water absorption Low; poor aging resistance, environmental stress cracking resistance is not as good as low density polyethylene, especially thermal oxidation will reduce its performance, so the addition of antioxidants and UV absorbers in the resin to improve this deficiency. The high-density polyethylene film has a low heat distortion temperature under stress, and should be taken care of when applied.

Factory price PE material hard plastic sheet HDPE sheet 1mm thickness

1.Classification of HDPE sheet

HDPE industrial sheet

HDPE UV stabilized sheet

HDPE anti static sheet

HDPE anti flame sheet

2.Sizes of HDPE sheet

Thickness range: 0.7mm~50mm

Width max: 3000mm

Length: no limit

Popular sizes: 1000*2000mm, 1220*2440mm(4'*8'), 1500*3000mm

Other measurements can be custom as your requirements.

3.Surface of HDPE sheet

Plain, Texture or as clients' demands

4.Popular Colors of HDPE sheet

White, black, blue, yellow, green, red, also support customization as Pantone No

5.Performances of HDPE sheet

Excellent chemical resistant

Good wear resistant

Anti-weather and Anti-aging

Good electrical insulation

UV resistant

Stain resistant

Good protection against stress cracking

Very low water absorption (Moisture resistant)

Low maintenance cost

Resists organic solvents, degreasing agents & electrolytic attack

High flexibility at high or low temperature

The machanical strength of surface hardness,stretching intensity and rigidity is higher than LDPE

Food safe. Non-toxic and smell

Parameters

ITEM	UNITS	ASTM TEST	HDPE
Tensile strength	psi	D-638	4,000
Flexural modulus	psi	D-790	200,000
Notched impact	ft-ibs/in of notch	D-256	1.3
Heat deflection temperature@66psi	℉	D-648	172
Maximum continuous service temperature in air	℉		-
Water absorption	%	D-570	0.10
Coefficient of liner thermal expansion	in/in/℉10-5	D-696	7.0

Applications of HDPE sheet

1.Food storage and freezing equipment

2.Cutting boards, kitchen counters, kitchen shelves

3.Protective surface in the food processing industries

4.Acid and alkali resistant equipment, environmental protection equipment

5.Water tank, washing tower, waste water, waster gas discharge, water treatment equipment

6.Chemical containers, medicine and food packaging

7.Machinery, electronics, electrical appliances, decoration and other fields

8.Clean room, semiconductor plant and related industrial equipment

9.Gas transportation, water supply, drainage, agricultural irrigation

10.Pump and value components, medical appliance parts, seal, cutting board, sliding profiles

11.Outdoor recreational facilities and indoor house furniture, sound barrier, toilet partition, partition board and furniture, rainbow chairs.

HDPE Sheet/Panel/Board/Plate Manufacturer/High Density Polyethylene Plastic Sheet (HDPE)

Certifications

Our Company

Henan Yiqi Plastic Products Co., Ltd is located in Zhengzhou, the capital of Henan province. Its factory has over 15 years' manufacturing and processing experience. Technology R&D team keeps pursuing innovation and enriching product performance, greatly enlarging the application of our products. Manufacturing technique includes extrusion, injection and mould pressing, also undertaking welding, CNC carving such post processing and so on.

Main products: plastic cutting board, natural straw cutting board, plastic sheet, HDPE conveyor roller and other kinds of plastic processing parts. Its product covers environmental protection equipment, chemical, packaging, construction, food industry and so on.

Henan Yiqi Plastic products have been exported to Europe, Australia, North America, Southeast Asia, South America and other regions. Henan Yiqi Plastic looks forward to going farther with you together!

Packing & Delivery

Packing

With years of export experience along with excellent quality, advanced services and competitive prices, Henan Yiqi Plastic has won numerous customers' trust and support.

Package details of HDPE sheet: plastic film+wood pallet and strip

Other demands are based on clients' demand.

Delivery

Express by DHL, UPS, EMS, etc.

By air or by shipping.

FAQ

Q:Could I get a sample of HDPE sheet before order?
A:Yes, welcome. Free sample is available.

Q:Do you support post processing after finished board?
A: Of course, just let we know your requirements.

Q:How do you deal with the quality problem?
A:Firstly, you may have no chance to meet this kind problem;

Then, if you discover this kind problem, 100% full-refund your cost.