High Quality Colorful Nylon (PA6) / MC Cast Nylon Sheet, Parts
Nylon’s toughness, low coefficient of friction and good abrasion resistance make nylon rod, nylon sheet and nylon tube an ideal replacement for a wide variety of materials from metal to rubber - it weighs only 1/7th as much as bronze.
Using nylon rod, nylon sheet and nylon tube reduces lubrication requirements, eliminates galling, corrosion and pilferage problems, and improves wear resistance and sound dampening characteristics.
Nylon rod, nylon sheet and nylon tube has a proven record of outstanding service in a multitude of parts for such diverse fields as paper, textiles, electronics, metalworking,mining, aircraft, food and material handling
Nylon sheet is also an ideal material choice when manufacturing thermal breaks for use in construction projects as a thermal insulator (break) between steels. For more information about our thermal break cutting service please contact us to discuss your requirements
Main properties of our range of nylon sheet, nylon rod are that :
nylon has high mechanical strength, stiffness, hardness and toughness
nylon has good fatigue resistance
nylon has high mechanical damping ability
nylon has good sliding properties
nylon has excellent wear resistance
nylon has good electrical insulating properties
nylon has high resistance against high energy radiation (gamma and X-rays)
nylon has good machinability
It is important to remember that nylons can absorb up to 7% (by weight) water under high humidity conditions or when submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can substantially compensate for this factor. Alternatively, acetal or Ertalyte PET-P can be considered for such applications.
The differences in physical properties which exist between the different types of Nylon grades below are mainly determined by the composition and the structure of their molecular chains.
What is the difference between cast and extruded Nylon ?
The main difference lies in the manufacturing process. Cast polyamide products are manufactured by means of a chemical reaction process. This allows products with extremely large dimensions and custom cast parts to be manufactured. Water absorption and dimensional changes are lower in CAST. The crystallinity is greater so that wear resistance and machinability are better. Extruded absorbs more moisture and is thus tougher and has greater impact and vibration damping properties.
Nylon Application :
Good mechanical properties and resistance to heat and fuels, make these materials suitable for mechanical and electrical, hardware and under-the-hood components. Examples are: Timing sprockets, Speedometer gears, Cooling fans, Wire connectors, Windshield wiper parts, Door-latch hardware, Molded fender extensions, Steering-column lock housings, Brake fluid reservoirs, Bearings
Nylon Sheer Sizes:
| Thickness | Sizes | Colors |
| 1mm~100mm | 1000mm x 1000mm | White, Black, Bule, Green etc (As customers' requirements) |
| 1000mm x 200mm | ||
| 100mm~150mm | 1000mm x 1000mm | |
| 150mm~200mm | 500mm x 500mm |
Mechanical Property :
| Property | Unit | PA6 | PA66 | PA-GF30 | PA Anti static | PA Conductivity |
| Density | g/cm3 | 1.13 | 1.14 | 1.34 | 1.12 | 1.24 |
| Long Term Working Temperature | °C | 85 | 95 | 120 | 100 | 105 |
| Yield Stretch Strength | Mpa | 74 | 90 | 140 | 50 | 55 |
| Beaking Stretch Strength | Mpa | 50 | 40 | 5 | 60 | |
| Beaking Stretch Rate | % | 5 | 3.5 | 100 | 5 | |
| Bending Modulus | Mpa | 2200 | 4500 | 2200 | 2200 | |
| Hardness | Mpa | 85 | 88 | 80 | ||
| Impact Strength | KJ/M2 | 50 | 55 | 180 | 45 | 45 |
