Main Products: , , ,
6-port 10/100/1000M Industrial PoE Switch managed, 4 RJ45 ports and 2 Gigabit SFP
Negotiable
Min.Order:1
Product Details
IEEE 802.3af/at 4 PoE Ports 10/100/1000M Industrial managed poe switch with 2 SFP uplink port
Description:
The ZX600M-AFG-42F&ZX600M-ATG-42F device is a kind of industrial PoE media converter, it support 4 10Base-T/100/1000Base-TX POE port and 2 gigabit SFP slots. These converters are classified as power source equipment (PSE), and when used in this way provide up to 15.4 watts IEEE802.3af & 30 watts to IEEE802.3at compliant powered devices (PD), eliminating the need for additional wiring.
It provided some kinds of advanced network managed function, like as: Ring redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring, fault alarm and firmware upgrade online. SW-Ring can bring your Ethernet to intelligent redundancy. Standard Industry design, can satisfied every requirement of the industry scene. All components used industry grade, it takes products high reliability. It provided wide voltage power supply input.
It support CE, FCC ROHS standard, adopt industry standard design, IP30 protection, rugged high-strength metal case, Dual power supply input (DC48-55V), -40 to 75°C working temperature. The converters support IEEE802.3/IEEE802.3i/IEEE802.3uIEEE802.3ab/IEEE802.3z with 10/100/1000M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
The main features:
Specifications:
|
Product Name |
6 ports Gigabit Managed Industrial PoE Switch |
|
Product Model |
ZX600M-AFG-42F; ZX600M-ATG-42F |
|
Interface |
4x 10/100/1000M copper RJ-45 ports, 2x 1000M SFP port ,1 console |
|
Network Protocols |
Support IEEE802.3,IEEE802.3u,IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.1d, IEEE802.1w |
|
L2 ( Layer 2 Switching ) |
|
|
Port management |
Enable / disable port Speed, duplex, MTU settings, etc. Flow-control flow control setup Port information view, etc. Support port access direction, VLAN image To support the port speed limit, Support port isolation settings Unknown unicast, multicast, broadcast storm suppression |
|
Spanning Tree Protocol |
Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
|
Link Aggregation |
Support static manual aggregation, Support LACP dynamic convergence IEEE 802.3ad |
|
VLAN |
Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ;n Support Port based VLAN and IEEE 802.1Q VLAN |
|
IGMP snooping |
Support static add / delete, Support v1/2/3 dynamic multicast listener, supports 256 multicast groups |
|
GMRP |
supports GARP multicast registration protocol |
|
MAC |
Support static add / delete MAC address learning limit Support dynamic aging time settings |
|
Extended function |
|
|
ACL |
based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
|
QOS |
based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
|
MPLS |
MPLS supports static LSP Support VPN MPLS |
|
LLDP |
supports LLDP link discovery protocol |
|
802.1x |
Support 802.1x port authentication (Radius, local) |
|
Prevent attack |
DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding) |
|
system management |
User add / delete user User login, operation, status, event log Device reset, configuration save / restore, upgrade management, time setting, etc. |
|
management function |
|
|
CLI |
support serial command line management |
|
TELNET |
support serial command line management |
|
SSH |
supports SSHv1/2 remote management |
|
SNMP |
support v1/2/3 |
|
ColdStart, WarmStart, LinkDown, LinkUp |
|
|
WEB |
supports two layers, tZXee layers of view, etc. |
|
Other parameters |
|
|
PoE Specification |
PoE Standard: Supports both IEEE802.3af and IEEE802.3at |
|
Single PoE Port Power Output: Max. 15.4 watts (IEEE 802.3af) Max. 30 watts (IEEE 802.3at) |
|
|
PoE port Auto detect AF/AT devices |
|
|
PoE Port Output Voltage: DC48V |
|
|
Power Pin Assignment:1/2+;3/6- |
|
|
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
|
Fiber Media |
Multi-mode: 1310nm, 2Km Single-mode: 1310nm, 20; 1550nm, 40/60/80Km |
|
Performance Specification |
Bandwidth: 24Gbps |
|
Forwarding Mode |
Store-And-Forward |
|
LED Display |
Fiber Run indicator: FX1,FX2 Power supply indicator: PWR PoE ACT indicator: LED-Yellow 1000M LINK indicator: LED-Green |
|
Power Supply |
Input Voltage: DC48V (48~55V) Type of input: 6 pins terminal block No-load consumption: MAX 5W@ DC52V0.1A Full-load consumption: MAX 65W@ DC52V1.25A (802.3af) Full-load consumption: MAX 104W@ DC52V2A (802.3af+) Full-load consumption: MAX 130W@ DC52V2.5A (802.3at) |
|
Working Environment |
Working temperature: -40~75℃ Storage temperature: -40~85℃ Relative Humidity: 5%~95 %( no condensation) |
|
Industry Standard |
EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
|
Mechanical Structure |
Shell: IP30 protect grade, metal shell Installation: DIN-Rail or Wall mounts |
|
Certification |
CE mark, commercial |
|
MTBF |
300,000 hours |
|
Warranty |
5 years |
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln