2×2 optic fiber Polarization Beam Splitter
1. Description:
The optic fiber Polarization Beam Splitter with Small MFD Fiber is built based on PM collimator and Wollaston prism, with All-glass technique sealed Process.lt can split single mode into two vertical polarization states, or split a certain Polar state into two polar state with 50/50 signal power.
2. Features:
High Extinction Ratio
Low lnsertion Loss
Flexible polarization light path
3. Applications:
High power EDFA
Fiber sensor system
Fiber Amplifiers system
4. Specifications:
|
Parameters |
Unit |
Value |
|
nm |
1310,1480,1550 |
|
|
nm |
±40 |
|
|
Typ.Excess Loss(Port3 to Port1/2 at Slow Axis; Port4 to Port1/2,at Fast Axis) |
dB |
1.2 |
|
Max.Excess Loss(Port3 to Port1/2 at Slow Axis; Port4 to Port1/2,at Fast Axis) |
dB |
≤1.5 |
|
dB |
≥50 |
|
|
dB |
≥20 |
|
|
Power handling(CW laster) |
mW |
≤500 |
|
Tensile Load |
N |
≤5 |
|
--- |
Small MFD PM Panda fiber |
|
|
Operating Temperature |
℃ |
-5 to +70 |
|
Storage Temperature |
℃ |
-40 to +85 |
Order Information:
|
wavelength |
Pigtail type |
Fiber type on port3 |
package |
Connector |
Fiber length |
|
|
|
1310nm 1480nm 1550nm |
0=Bare 1=0.9mm Loose tube |
0=SM fiber (SMF-28e or Hi1060) 1=PMF,slow axis align 450 to port1 2=PMF,slow Axis align to port1 |
5.5x35mm |
FP=FC/PC FA=FC/APC SP=SC/PC SA=SA/APC etc |
0.5m 0.8m 1.0m etc |
Contact: