single mode G652D G657A 3.0mm yellow cable 3m length LC/UPC-LC/UPC fiber optic jupmer optical fiber patch cord
1.LC-LC SX Single mode fiber optic patch cord
2.High return loss
3.Low insertion loss
4.High repeatability
Insert-pull, key-oriented coupling mechanism which allows high repeatable, low-loss connection Simplex ,Duplex and Multi-core accessories for standard or customized structure.
PC/UPC/APC polish
Comply with Telcordia GR-326-CORE Specification
The material of plastic plug comply with the request of UL94V-O And Standard of RoHS
CATV,Metro,Test equipment
Local area networks(LANs)
Wide Area Networks(WANs)
Active device termination
Telecommunication networks
|
Item |
Single mode |
Multi mode |
|
Fiber diameter |
9/125um |
62.5/125um 50/125um |
|
Insertion loss |
PC≤0.3dB APC≤0.2dB |
PC≤0.3 dB |
|
Return loss |
PC≥50 dB APC≥60 dB |
PC≥35 dB |
|
Insert–pull test |
(1000 times)≤0.3 dB |
|
|
Interchange |
≤0.2 dB |
|
|
Operation temperature |
-40°C ~ +80°C |
|
|
Anti-tensile force |
15kgf |
|
The reason you select our products
1.good quality. we offer the products to customers for 6 years, most of them give us good feedback about the quality.
2.good service. we offer the 1year warranty for customer. offer OEM, can make customer's LOGO and Brand on products.
3.Short delivery time. we can send products in 1-2days by DHL,Fedex,UPS,TNT express, customer can receive the products in 5-7days after we send out the products.
4. Save the freight for customer. we offer the best way to send the products to lower the freight for customer.
5.We are Alibaba Assessed 5 years Gold Supplier.
Shipping
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods,Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: 3-5days for samples; 3-7 days for batch goods.
Payment Terms
1.Payment: T/T, Western Union, MoneyGram,PayPal; 30% deposits; 70% balance before
delivery.
2. MOQ: 1pcs
3. Warranty : 3year
Kindly Reminder
1, Used to be optical fiber jumper ceramic ferrule and an inserting core section wipe clean with alcohol and absorbent cotton.
2.The use of optical fiber minimum bending radius is less than 30mm.
3. Protecting the plug core and core inserting end, to prevent the bumps, pollution, put on the dust cap immediately after removal.
4. Do not look directly at the laser signal transmission of optical fiber end.
5. The emergence of optical fiber jumper human and other factors not anti damage should be timely replacement of damaged.
6. The optical fiber network or abnormal cases, may be excluded from the analysis by using the fault test. Test or exclude jumper fault can be done first on-off test, can usually be on the whole optical fiber link lighting judgment using visible laser pen. Or further use of precision fiber insert loss and return loss tester, test its indicators, indicators in the qualified range jumper instructions is normal, but the reverse is not qualified.