32 port 19dBm 1550nm amplificador optico high power pon catv  wdm EDFA 

 

 

1.Application:

Single-mode fiber 1550 amplification network

FTTH network 

CATV network

Long distance trunk network.FTTx PON, max working wavelength: 1529.16~1563.86nm. 

All kinds of SDH/PDH transmission system

 

2. Performance Characteristics :
Built-in optical fwdm,it can transmit broadband network and CATV together.

Adopts Er Yb Codoped double-clad fiber technology; 

Catv input ports: 1 optional

Olt input ports: 4-32 optional 

Com Output ports: 4-32 optional;

Optical output power: total output up to 15W(41dBm); 

Low noise figure: <6dB when input is 0dBm; 

Perfect network management interface, in line with standard SNMP network management;

Intelligent temperature control system make the power consumption lower;

 

3. Block diagram

4. Technique Parameter

Item	Unit	Technique parameters	Remark
Operating bandwidth	nm	1545 - 1565
Optical input power range	dBm	-3 - +10	Max rang:-10-+10
Optical Switching time	ms	≤ 5
Maximum optical output power	dBm	41
Output power stability	dBm	±0.5
Noise figure	dB	≤ 6.0	Optical input power 0dBm, λ=1550nm
Input and outpur Return loss	dB	≥ 45
Optical Connector Type		CATV IN:SC/APC, PON:SC/PC OR LC/PC COM:SC/APC OR LC/APC
PON to COM port insertion loss		≤ 1.0	dBm
C/N	dB	≥ 50	Test condition according to GT/T 184-2002.
C/CTB	dB	≥ 63
C/CSO	dB	≥ 63
Power supply voltage	V	A: AC100V - 260V (50 Hz~60Hz) B: DC48V(50 Hz~60Hz) C:DC12V(50 Hz~60Hz)
Operating temperaturerange	°C	-10 - +42
Maximum operating relative humidity	%	Max 95% no condensation
Maximum storage relative humidity	%	Max 95% no condensation
Dimension	mm	483(L)×440(W)×88(H)