UTECH CNC, buy cnc plasma cutting machine 1325 cnc plasma cutting machine on China Suppliers Mobile

Product Details

cnc plasma cutting machine 1325 cnc plasma cutting machine

WHAT TO LOOK FOR WHEN PURCHASING A PLASMA CUTTING MACHINE

1. Determine the thickness of the metal that you will most frequently cut

2. Test the machine and examine the cut quality

3. Find out if the machine is easy to operate and feels comfortable

Power source

Brand	Power	Recommended cutting thickness for carbon steel	Recommended cutting thickness for stainless steel
	LGK 63A	10mm	5mm
	LGK 100A	12mm	6mm
	LGK 120A	15mm	8mm
	LGK 160A	20mm	10mm
	LGK 200A	25mm	15mm
	Powermax 45A	8mm	3mm
	Powermax 65A	12mm	5mm
	Powermax 85A	15mm	6mm
	Powermax 105A	18mm	10mm
	Powermax 125A	25mm	16mm

Configuration

Model	SESAME P1
Working size	1300mm*2500mm, 100mm stroke z-axis sliding table
Cutting speed	10-15m/min
Transmission system	1.25m rack, square 20 linear guide and slider
Operating System	Starfire SF2100/DSP A12 control system
Driver	JMC stepper motor and driver
Plasma power supply	Huayuan
Cutting thickness	0-30mm
Cutting type	Plasma/oxy-acetylene or propane
Input voltage	3 phase,220v/380v±10%
Mode of file transfer	USB Interface
Water tank	Underlay stainless steel sink(absorb smoke and prevent burning)
Table-board	sawtooth + square pipe, spacing is 70 mm
Straight line positioning precision	±0.2mm/10m
Straight line repeat precision	±0.3mm/10m
Environmental temperature	-5~45°C
Humidity	<90% No concreting

Features

1. Welded thick-walled steel structure, after special treatment, no distortion for the whole structure high precision, and long service life time.

2. Cutting system use Beijing Starfire system/ Start system/ FLMC-2300A or DSP system; Equipped with automatic height controller (THC controller), which can according to your material planeness, cutting head can automatically stable, and fast adjust.

3. Taiwan linear rail, ensure vertical section, more precision.

4. Suitable software: Artcam/ Fastcam/ Starfire etc.

5. FASTCAM programming software based on AutoCAD automatic programming and material system.

6. FASTCAM is designed for all kinds of NC cutter with cutting software, the software can help the user completing various complex parts drawing, programming, material, using convenient, also bring the obvious economic benefit.

7. If you cut thick material, according to actual use, we’ll add water tank for you for free, to absorbs a large amount of smoke generated during cutting.

8. Machine could be customized, whatever specifications, appearance, etc. Any request you’ve, could tell us directly.

Detailed Images

	Plasma cutting head Including control box for adjusting height, photoelectric switch and limit switch.
Starfire control system+Shanghai HYD Arc voltage regulator Adjust the distance automatically as the different materials
	Plamsa power supply Chinese Huayuan power supply
Gear+Taiwan HIWIN rail guide XY axis by gear rack transmission, HIWIN rail guide to make machine higher precision, faster cutting speed, more bettre cutting performance.
	JMC Stepper driver
sawtooth + square pipe The table can bear 2000-2500kg without deformation
	Water tank absorb smoke and prevent burning

Packaging & Shipping

Packing:

1/ If machine delivery via LCL, then would packed with wrapping film, EPE foam, and standard export plywood box.

2/ If machine delivery via FCL, then dont need wood box, would packed with warpping film and EPE foam.

Shipping:

We support machine delivery via express, air transportation, land transportation and sea transportation.

1/ Such as some small machine, Mini CNC Router or Small CO2 Laser Machine and Fiber Laser Marking Machine, usually delivery via express and air transportation.

2/ If you wanna us help you delivery to domestic warehouse or Russia, Kazakhstan etc, usually delivery via land transportation.

3/ Large machine or some countries where shipping is more convenient, usually suggest choose sea transportation.

You can choose any way you'd prefer, we also will give you some proper suggestions.

FAQ

1. What is plasma cutting technology?
In simplest terms, plasma cutting is a process that uses a high velocity jet of ionized gas that is delivered from a constricting orifice. The high velocity ionized gas, that is, the plasma, conducts electricity from the torch of the plasma cutter to the work piece. The plasma heats the workpiece, melting the material. The high velocity stream of ionized gas mechanically blows the molten metal away, severing the material.
2. What can I use a plasma cutter for?
Plasma cutting is ideal for cutting steel, and non-ferrous material less than 1 inch thick. Oxyfuel cutting requires that the operator carefully control the cutting speed so as to maintain the oxidizing process.

3. Does U-MAY have maintenance manual and operation manual?
Each cnc machine leaving the factory will be along with related series or model the English instructions including maintenance manual and operation manual. Attached documentations may also include cnc controller instruction, parts instruction you bought(like rotary, oil cooler)

4. In case of failure, how to do?
Call us----our enginners are online for 24-hours,and ready to serve you.
Replacement of damaged parts for free---For more information,please contact us
The CD and operation manual----It show the most common failure in working processing and how to solve this problems.

Company Information

Shandong U-May CNC Technology Co., Ltd. is a high-tech enterprise integrating industry and trade. It is located in Jinan City. Its "UTECH" brand products have passed many certifications such as EU CE/ISO quality management system/appearance patents. It has a professional technical and design team, focuses on customer needs, provides customized solutions for customers, and establishes a unique set of features. Service model is a high-tech enterprise integrating industry and trade. It is located in Jinan, Quancheng City. Its "UTECH" brand products have passed many certifications such as EU CE/ISO quality management system/appearance patents. It has a professional technical and design team, focuses on customer needs, provides customized solutions for customers, and establishes a unique set of features. Service model.

Our Services

Before confirming the production order, we will provide the rendering picture and 360-degree panoramic video, so that customers can fully understand the style and structure of the machine, so as to ensure that the actual machine meets the requirements of customers, so as to avoid the discrepancy between the real object and customers' imagination caused by various communication deviations.

UTECH technical support is designed to help you make the most of the machine. A variety of technical files and installation videos will be placed in the U disk and shipped with the machine. Our technical experts can provide online remote support and training, and contact UTECH technical support experts in real time for remote diagnosis. Door to door service is also available.