Stainless Steel, buy Cold rolled mirror 304 stainless steel plate 0.5 mm stainless steel sheet price on China Suppliers Mobile

Product Details

Cold rolled mirror 304 stainless steel plate 0.5 mm stainless steel sheet price

Specification

Item Name	ASTM 410 420 430 440C STAINLESS STEEL PLATE Price Per Ton 2B BA Finish
Specification	sus
Standard	ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME
Mill/Brand	Tisco, Lisco, Posco, Baosteel, Jisco
Thickness	0.3/0.4/0.5/0.6/0.8/1.0/1.2/1.5/1.8/2.0/2.5/3.0/4.0/5.0/6.0/8.0/1.0 to 150 (mm)
Width	1000/1219/1250/1500/1800(mm)
Length	2000/2438/2500/3000/6000(mm)
Surface Finish	No.1, 2B mill finish, BA bright annealed, #4 finish brushed, #8 mirror, checker plate, Diamond floor sheet, HL hairline, Grey/dark hairline
Certificate	SGS, BV, ISO,
Protective Film	PVC protective film
Stock Size	All sizes in stock
Service	Cut to sizes as custom's request

Product Description

Stainless steel sheet have beautiful surface, diversified use possibilities; good corrosion resistance; longer durability than ordinary steel; good corrosion resistance; high temperature oxidation resistance and high strength, so it can resist fire; good plasticity, good welding performance.

Finish Thickness Characteristics Application

No. 1 3.0mm~50.0mm Finished by hot-rolling Chemical industry

No. 2B 0.3mm~6.0mm Finished by heat treatment General Application

No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment Kitchen utensil

No. 4 0.4mm~3.0mm Polishing Milk & Food processing

HL(Hair Line) 0.4mm~3.0mm Finished by continuous heating Architectural purposes

201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.

Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.

J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less than J4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2 and J5 are still good, because the hardness is high (both above 96°) and the polishing is more beautiful, but the square pipe
or the elbow (90°) is easy to burst. Flat panel: Due to its high hardness and beautiful surface, it can be frosted, polished and
electroplated. But the biggest problem is the bending problem. The bending is easy to break, and the groove is easy to burst. Poor
scalability.

J3 (low copper) : suitable for decorative pipes. Simple processing can be done on the decorative panel, but it is impossible if it
is a little difficult. There are feedbacks that the shearing board is bent and there are internal seams after breaking (black
titanium, color plate series, sand board, broken, and folded, there are internal seams).

J4 (high copper) : It is the high end of the J series. Suitable for deep drawing products with small angles. Most products that
require deep salt mining and salt spray testing will choose it. Such as sinks, kitchenware, bathroom products, water bottles,
thermos cups, door hinges,
handcuffs, etc

304 stainless steel

304 is a wide range of stainless steel, widely used in the manufacture of equipment and parts that require good overall
performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the
steel must contain more than 18% chromium and more than 8% nickel.

316 stainless steel

Due to the addition of Mo, 316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance and high
temperature strength, and can be used under harsh conditions; it can be used to manufacture seawater utilization equipment,
chemicals, dyes, paper, oxalic acid, fertilizers and other production equipment; photos, Food industry, coastal area facilities,
ropes, CD rods, bolts, nuts and other accessories.

430 stainless steel
Type 430 stainless steel is probably the most popular non-hardenable ferritic stainless steel. Type 430 is famous for its good corrosion resistance, heat resistance, oxidation resistance and decoration. It is important to note that after good polishing or polishing, its corrosion resistance increases. All welding must be performed at a higher temperature. Due to this combination, it
is used in many different commercial and industrial applications, including: furnace combustion chambers, car decoration and
molding, drains and downpipes, nitric acid plant equipment, petroleum And natural gas refining equipment, restaurant equipment,
dishwasher lining, component brackets and fasteners, etc.

Application

Stainless steel sheets widely used for pulp and paper equipment heat exchangers, machinery, dyeing equipment, film developing equipment, pipelines, building materials for coastal areas, etc.

Company Profile

Shandong Ganquan Trading Co., Ltd., located in Jinan, the beautiful capital of Shandong Province, is a company integrating steel export and customized design. The company's main products: H-section steel, I-beam, angle steel, channel steel, flat steel, round steel, galvanized profile, stainless steel and p-section steel. Our precision cold-rolled pipe series has smooth appearance and no oxide layer. It is widely used in automobile manufacturing, petrochemical industry, aerospace, boiler equipment, medical equipment and other industries. Comply with Chinese national standard (GS) and American Standard ASTN. The company has advanced product testing instruments, excellent marketing team and domestic channel partners, and has a perfect management plan for product market development and product after-sales service. The sales network and product sales agencies are all over the country. Strong and professional R & D team and advanced and perfect sales and service concept make our products have high popularity and market share at home and abroad. At the same time, we will always adhere to the principle of "reputation first, customer first", always put the interests of customers first, and wholeheartedly provide each of our customers with the best products and the best service. We look forward to working with friends all over the world to create a better future!

Exhibition

Shandong Ganquan Trading Co., Ltd. will participate in international exhibitions every year, such as Beijing BMW exhibition,Guangzhou Canton Fair exhibition, Shanghai International exhibition, and so on. At the same time, we cooperate with friends all over the world and sign cooperation agreements on site. We sincerely hope that friends can visit Shandong Ganquan Foreign Trade Company.

Packing & Delivery

Over the past two years，our network export Station has exported more than 30 countries and regions with customers on 3 continents. Export steel 200, 000 tons，cumulative sales of 1 billion yuan.Packaging: In bundle with steel strip or packed in wooden pallets or as customers’ requirement. Shipping:We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.

Certifications

FAQ

1.What's your payment? 30% T/T deposit in advance, 70% T/T balance within 5 days after B/L copy or 70%T/T balance 100% Irrevocable L/C at sight 2.What's your delivery time? Within 7 days fastest,7-15days 3.Do you accept customized orders? Yes,just tell us your requirements 4.Are you a factory or trading company? Both 5.Which countries do you export to? South Africa,Zimbabwe,Uganda,Egypt,Korea,Southeast Asia,Colombia,Pakistan,India,Bengal,Brazil,etc. 6.Do you offer samples? Yes,free samples can be provided and you only need to pay the postage. 7.Why are your price is higher than other suppliers? We guarantee that our price is lowest under the same quality

Please leave your enquiry in the message box at the bottom of the product page and click SEND, online salesman will contact you at once.