Brand: Mitsubishi

Product Name: low inertia small capacity servo   Motor model:HG-KR13BJ

Servo motor series: low inertia, small capacity. Rated output: 0.1kw. Rated speed: 3000r / min. Electromagnetic braking: attached.

Oil seal: attached (Note 1, note 2, note 3). Power supply: 200V.

Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr series. Note 2 With reducer, oil seal is not equipped.

Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors with oil seal are different. The rated speed is 3000r / min and the large speed is 6000r / min.

The high torque is 350% of the rated torque, realizing high torque in the field of high rotation. It only supports hg-kr series products. Built in position encoder with high resolution.

Provide standard high-resolution position encoder (4.194304p/rev (22bit)). Realize more positioning function.

To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt IP65. Three general purpose AC servo amplifiers melcervo-j2-super series. Rated output: 0.4KW. Built in positioning function.

Voltage: 3-phase ac200vac or single-phase AC230V. The CPU integration of Mitsubishi hg-kr13bj greatly improves the responsiveness of products

Due to the application of CPU, the responsiveness is greatly improved.

The frequency response of the speed loop is increased to more than 550hz. Hg-kr13bj mr-j2-super series is a good device for high-speed positioning applications. Easy adjustment.

Model adaptive control / real-time automatic tuning. Type: hf-se servo motor, medium inertia, medium power, rated output power: 2.0kw.

Rated speed: 2000r / min Mitsubishi hg-kr13bj. Electromagnetic braking: none. Oil seal: none.

The servo motor can control the speed and position accuracy very accurately

The voltage signal can be converted into torque and speed to drive the control object. The rotor speed of the servo motor is controlled by the input signal and can respond quickly in the automatic control system as an actuator

It has the characteristics of small electromechanical time constant, high linearity, starting voltage and so on,

The received electrical signal can be converted into angular displacement or angular speed on the motor shaft and output. Mitsubishi hg-kr13bj is divided into DC and AC servo motors. Its main characteristics are:,

When the signal voltage is zero, there is no rotation, and the speed decreases uniformly with the increase of torque. The terminal strip of servo amplifier adopts connector to reduce the required wiring time. The connector is located in front of the servo amplifier to facilitate cable connection.

The gain can be adjusted conveniently through the real-time automatic tuning function. It is widely used for servo drive, machining equipment and machine tool feeding.

For food, packaging equipment and feeding devices. Used in textile machinery, etc. It can improve the performance of the equipment.

It is easy to operate and reduce the workload. Enhanced system cost performance.

, positioning (servo motor encoder resolution: 131072). High responsiveness.

Vibration control function through adaptive vibration.

The personal computer and servo setting software are used to optimize the tuning. Mitsubishi servo driver has two types of interfaces:

Pulse train interface is used for position control and internal speed control.

The analog input interface is used for speed control and torque control. Mitsubishi Electric general AC servo amplifier melcervo-j3 series. Rated output: 0.75KW.

Interface type: CC link communication type (built-in positioning function) Mitsubishi servo driver.

Power specification: single phase ac200v

The positioning operation is realized by setting the position and speed data in the positioning table and receiving the start signal from the main controller. The setting of position, speed and other data in the positioning table and the start and stop operation can be completed through CC link communication.

By using mr-j3-d01 to expand I0 unit, the location table selection and location operation can be carried out through di / O instruction. When mr-13-d01 is used, CC ink certificate cannot be carried out

Using the servo amplifier with built-in positioning function, the position, speed and other data can be set through CC link communication. (corresponding to CC link version ver. 1.10)

Start, stop and monitor can be realized through CC link communication. Hg-kr13bj serial communication reduces wiring.

Through CC link communication, the distributed co server control system can be constructed. The three hg-kr13bj parameter unit mr-pru03 (option) makes the teaching setting, operation and easier. The servo amplifier can be operated by dry speed control.

When both stations are occupied, the speed command can be set directly through the remote register.

Releated informations:

Condition:

A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.

Terms:

We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and inspection.

Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries.

All shipments are fully insured.