Monitoring System SPD, description about IP camera and power surge protector Lightning protection circuit IP surge protection on China Suppliers Mobile

Product Details

IP camera and power surge protector, Lightning protection circuit, IP surge protection

Features of CCTV Video Surge Protection

1. Multi-protection for both power and network signal.

2. Low residual voltage.

3. Low electric capacity design.

4. Offering the monitoring camera power supply.

5. Good transmission rate.

6. Quick respond.

7. Durable and long life.

Application Scope of IP camera surge protector

For the AC220V, AC24V and DC12V power supply HD security camera/ CCTV camera/ IP camera, and it’s transmission lightning protection is suitable for the RJ45 connector net work.

Brief Introduction of CCTV & CATV

DK-DW/m Two in One Combined Surge Protective Device is designed according to IEC standard. It is easy installation, simple maintenance and can work stably under severe environment.

It is suitable for HD security camera, CCTV camera and IP camera. Installed in the fore-end of the cameras, it can protect them from the permanent damage or wink out caused by induced over-voltage, over current, and other induced surge voltage.

Technical Parameters of IP camera surge protection

Model	DK-DW/m 12		DK-DW/m 24		DK-DW/m 220
Item No.	Power	Signal	Power	Signal	Power	Signal
Nominal Voltage(V)	DC12	5	AC24	5	AC220	5
Maximum ContiniuousWorking Voltage (V)	DC15		AC30		AC385
Norminal Working Currents (A)	5		5		5
Norminal Discharging Currents 8/20us (kA)	5	0.5	5	0.5	5	0.5
Maximum Discharging Currents 8/20us (kA)	10	1	10	1	10	1
Voltage Protection Level	≤250V		≤250V		≤1000V
10/700us Voltage		≤800V		≤800V		≤800V
Respond Time	≤1nS
Insertion Loss(dB)	≤0.5dB
Transmission Rate(bit/s)	100MHz
Way of Connection	Series Circuit
Dimension	104x63x37
Working Temperature	—25°C + 70°C
Working Humidity	≤95%

Dimension of IP camera and power surge protector

Installation and Cautions of lightning and surge protection

1) Connected this SPD in series between the circuit and the equipment.

2) Adopt connecting terminal as the power connector, RJ45 as the signal connector. Input terminal connect with the power and signal line. Output terminal connect with the equipment connector.

3) Grounding connection terminal connect the grounding line, and it shall connected firmly. The Grounding line shall be as short and thick as possible (the sectional surface shall be no less than 4 square mm) . And the earth impedance shall less than 10Ω. Please pay attention to check the grounding system to avoid the SPD loss protection function because of the open circuit or too high earth impedance.

DIKAI'S Production Line and Professional Laboratory and Testing Ground

DIKAI’s Famous Lightning Protection Program

1. The lightning protection of the "Nest" of Beijing Olympics in 2008.

2. Large lightning protection and grounding project of Longtan Hydropower.

3. Lightning protection for the security system of Guangzhou Baiyun International Airport.

4. Integrated lightning protection for China Sinopec Guangzhou Petrochemical.

5. Nigeria 500kA substation lightning protection project.

6. Integrated lightning protection project of Chinese National Weather Service.

7. Lightning protection project of Guangxi Mobile Base Station.

8. Lightning protection project of Guangxi People's Radio Broadcast.

9. Integrated lightning protection project of Nanning satellite ground station.

10. Grounding lightning protection project of Zhoushan Wind Farm, Zhejiang.

Similar Products

R&D Support

We have a professional R&D team for research and development of new techniques and products. With advance lab of lighting and testing, we can design the products according to customers’ requests and provide professional support on projects.

After-sale Service

Please feel free to contact our After-sale Service team if there is any problem.

We will be more than happy to help you in anyway we can.

Contact Us