3 in 1 CCTV Camera Combined Surge Protective Device

(8/20μS Class II Testing 10kA)

1. Product Introduction

  DK-DSX/m CCTV camera series combined surge protective device(SPD) is designed and manufactured according to IEC Standard. It adopts combined connection of power, video and control line, is suitable for lightning protection of video transmission and power system. It takes the advantages of large capacity and fast response, making sure the IP camera can work normally.

 

2. External View

 

 

 

 

3. Technical Parameter

Power Line Lightning Protection Characteristic
Nominal Discharge Current In(8/20µs)	10kA
Maximum Discharge Current In(8/20µs)	20kA
Respond Time tA	≤10ns
Maximum Load Current	10A
Video Line Lightning Protection Characteristics
Rated Working Voltage Un	1V
Maximum Continuous Working Voltage Uc	8V
Nominal Discharge Currents In(8/20µs)	10kA
Maximum Discharge Current In(8/20µs)	20kA
100V/µs Llimiting Voltage	≤30V
Respond Time tA	≤1ns
Type of Connector	BNC
Working Environment Characteristic
Material of Shell	Aluminum
Protection Level of Outer Shell	IP20
Working Temperature	–25~+70℃
Relative Humidity	95%RH

 

4. Item No.

Item No.	Un	Uc	Up
DK-DSX/m 12	DC12V	DC18V	100V
DK- DSX /m 24	AC24V	AC36V	450V
DK- DSX m 220	AC220V	AC275V	900V

 

5. Dimension

 

 

6. Wiring Diagram

 

  

Attention: During installation, if it needs to weld the grounding wire to the grounding grid, do welding job first and then connect the grounding wire with grounding terminal. Otherwise the power current caused by the welding will damage the SPD inside the product.

 

7. Application Scope

 1) AC220V, AC24V, and AC12V power supply HD monitoring system digital camera.

 2) Network transmission device system of RJ45 transmission rate.

 

 

8.Real Pictures