DC/AC SPD, buy Dikai OEM design surge protective device 20KA thunder protector for computer protection system on China Suppliers Mobile

Product Details

Dikai OEM design surge protective device 20KA thunder protector for computer protection system

Products Description

DK-20 power supply series modular surge protective device(SPD) is designed according to IEC61643 standard. It is accordance with the criterion of Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm DIN-Rail Mounting. With working indication window, temperature control circuit breaker and built-in over-current protective circuit, the modular SPD can release automatically to avoid fire danger when it breaks down. With remote alarm connector, it is convenient for remote monitoring. The main module and the base are replaceable. The lightning protection modes is L-PE, N-PE (2P/4P) or L-N-PE (1+1) / (3+1).

Applicable Power Supply System	TT, TN, IT
Maximum Continuous Operating Voltage Uc	AC 385V/275V
Nominal Discharge Current (8/20µs)	10kA
Maximum Discharge Current (8/20µs)	25kA
Voltage Protection Level Up	≤1.5kV
Leakage Current	≤20uA
Respond Time tA	≤25ns
Indication Method	Indication Window, Turn Red When Malfunction
Remote Alarm Function	Optional
Maximum Connection Wire Range	BVR 25mm2
Method of Installation	35mm Din Rail Mounted
Material of Shell	PC
Flame Retardant Rating of Outer Shell	UL94-V0
Protection Level of Outer Shell	IP20
Working Temperature	–25~＋70℃
Relative Humidity	≤95%RH

Item No. are available

Item Series	Protection Mode	Installation Location	Dimension(mm)	Item No
DK-20	L-PE, N-PE(2P)	Low-voltage Single Phase Power Distribution Cabinet	369166mm	DK-20 2P
		Low-voltage Single Phase Power Distribution Cabinet	369166mm	L-N-PE(1+1P)		DK-20(1+1)
		L-PE, N-PE(4P)	Low-voltage Three Phase Power Distribution Cabinet	729166mm	DK-20 4P
		L-N-PE(3+1P)	Low-voltage Three Phase Power Distribution Cabinet	729166mm		DK-20(3+1)

Application Scope

It can be installed in the low voltage power distribution cabinet/box of buildings, to protect all kinds of power equipment in the single (three) phase power distribution system between LPZ1 and LPZ2. Such as:
1) Low voltage general electricity cabinet and or distribution board of buildings.
2) Outdoor electricity cabinet/distribution box.
3) Applicable power supply system: TT, TN, IT.

Installation and Caution

1) DK-20 modular surge protective device(SPD) can be installed in any place of the single phase AC power line, and mostly be installed in power distribution boxes, power switches and sockets. It shall be connected with the power line in parallel, and shall adopt Kevin Connection, so as to lower the residual voltage.

2) Strip away the surface rubber of input and output terminal, and expose the copper core. Insert the copper core into the hole of the SPD, and make it firm with a screwdriver.

3) The cross-section of the grounding conductor connected with the module SPD indicating alarm shall be at least 16mm2, and the lead wire of the grounding conductor shall be shorter than 1m, and the shorter the better.

FAQ

Q1:who are we?

A1:We are based in Guangxi, China, start from 1989,sell to Oceania(25.00%),Western Europe(10.00%),EasternAsia(10.00%),Mid East(10.00%),Domestic Market(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),South America(10.00%),NorthAmerica(5.00%).

There are total about 101-200 people in our office.

Q2:Which certificate do you have for your equipment?

A2:Wehave established a complete quality management, supply chain and after-sales service system. Continuously introduce 6S international advanced concepts in management, and have successively passed ISO9001,CNAS National Laboratory, CQC certification,CE certification, Rohs certification.

Q3:how can we guarantee quality?

A3:Strict screening and assessment of raw material suppliers, screening and inspection before storage Always a pre-production sample before mass production; Automatic machine +manual double inspection before products are shipped, to ensure product consistency.

Q4:Could I have a sample or small order first for testing?
A4:Of course, sample order and small order are acceptable, especially for new customers under certain condition.

Q5: Is there a discount for larger orders?

A5: For new customers, there is a small discount, but when the value of the order is increased, we will provide a larger discount.For previous customers, we are happy to provide a discount for your loyalty.

Q6:what can you buy from us?

A6:Surge Protector,Lightning Rod,PV Supporting Equipments,power cord,signal protection

Q7:why should you buy from us not from us not from other suppliers?

A7:Guangxi Dikai Sci & Tech Co., Ltd.has been specialized in producing lightning protective products, researching development of lightning protective technology, consulting lightning protection service, and engineering lightning protection cases for 30 years.

Q8.what services can we provide?

A8:Accepted Delivery Terms:FOB,CIF,EXW,Express Delivery； Accepted Payment Currency:USD,EUR,CNY; Accepted Payment Type: T/T,L/C,Western Union,Cash; Language Spoken:English,Chinese,Spanish.

Q9.Can I only buy some spare parts from you?

A9:Of course, we can sell everything from spare parts to finished products.

Q10.Can you can design the equipment according to our size?

A10:Of course, we can customize any product according to customer requirements, and we can all provide design solutions and solutions.

Should you have any questions, please do not hesitate to contact us.