Introduction of peanut washing and peeling machine

1. The sesame washing and peeling machine is composed of a washing cylinder and a peeling cylinder.

2. The barrel is a vertical cylinder, the internal space can be fully utilized, small size, simple structure, beautiful appearance, easy operation, low maintenance rate.

3. A compound agitator is used. This agitator form can produce axial split flow. The radial diverting effect, the material is fully turned, no dead angle.

4. The use of a compound mixer shortens the time of sesame infiltration, peeling, and separation improves production efficiency and improves product quality.

5. The peeling machine is the special equipment for separating sesame skin, which has the advantages of thorough peeling, perfect grain, white, and brightness.

 

Working Principle of peanut washing and peeling machine

1. The machine is mainly composed of reducer, tank body, compound agitator, separation sieve plate, water adding pipeline, and various inlet and outlet.

2. The raw material is infiltrated with hot water added with a certain amount of caustic soda. The reducer drives the agitator to rotate. Due to the structural characteristics of the compound agitator, the materials are circulated up and down, and the sesame and the infiltration liquid are mixed evenly and fully.

3. The relative friction between the stirrer and sesame and between sesame and sesame is used to separate the sesame from the kernel to achieve the purpose of peeling the sesame.

 

Parameters of peanut washing and peeling machine

Model	SL-120
peeling motor	2.2kw
Separating motor	1.5kw
Capacity	400-500kg/h 4-5T/D (1ton sesame, 3ton water)
Hull removing rate	80%-85%
Size	1400*700*2000mm
Weight	250kg

 

 

 

 

 

1.We have sold this sesame seed peeling machine to many countries. Last month, 8 sesame peeler machines were sent to the customers in Nigeria and Ethiopia. The customers said that the machines were very easy to use and the output was high.

 

2. We check and test the machine before it is sent out. At the same time, in order to help customers better use our machine, we can provide the installation and

commissioning video of the machine, customers can rest assured to buy. If customers have any questions during the use, they can contact us at any time.

 

Installation and Maintenance

1. Fix the equipment during the first installation, and the environment needs water source, power supply, and good drainage facilities.

2. Turn on the power and check whether the device is running forward.

3. The water inlet pipe is connected to the water source. If the pressure of the water source is not enough, it is necessary to increase the pump pressure.

4. Clean up the equipment residue in time after using it every day. Separate the sieve surface and rinse it with water. If it is clogged, you can rinse it with a high-pressure water gun.

5. The reducer should periodically change the oil.