Crusher& Chipper, buy Industrial Wood Chipper Sawdust Making Machine In Malaysia Low Noise Branch Shredder Machine on China Suppliers Mobile

Product Details

Industrial Wood Chipper Sawdust Making Machine In Malaysia Low Noise Branch Shredder Machine

Product Description

1.Product Description of wood chipper machine

1.Wood chipper machine is to process logs or branches into 30mm.

2.Wood chipper machine is suitable for wood ball, textile, papermaking and other industries.

3.Wood chipper machine is a leather-making, pulping and wood-based panel industry.

4.Wood chipper machine has no special requirements for raw materials, so it can process logs, peeled twigs, bamboo, board, etc.

5.Wood chipper machine produces the sawdust with uniform length and minimal wear of sawdust disc, and the qualified rate is more than 97%.

Model	Capacity	Power	Weight	Main shaft speed	Blade qty	Blade diameter	Feeding inlet size
MY-400	0.8-1.0t/h	7.5-11kw	160kg	650r/min	3pieces	400mm	150*150mm
MY-600	1.5-2t/h	15kw	380kg	600r/min	3pives	600mm	180*150mm
MY-800	3-6t/h	22-30kw	520kg	550r/min	4pieces	800mm	200*200mm
MY-950	5-8t/h	30-37kw	950kg	550r/min	4pieces	900mm	230*250mm
MY-1150	8-10t/h	55-75kw	2000kg	500r/min	4pieces	1100mm	330*300mm
MY-1410	15-16t/h	110kw	2600kg	500r/min	4pieces	1400mm	400*400mm
MY-1500	15-25t/h	132kw	3500kg	500r/min	4pieces	1500mm	480*450mm

Raw material and final of wood chipper machine

Raw material could be wood log wood tree branch etc.

Production Flow

1. Crush the raw material into small pieces (size is about 3-5mm), if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of briquette machine by worker or by screw conveyor;
4. Produce the briquette from the dried material without any additive by the wood briquette machine;
5. Carbonized the briquette and become charcoal briquette.

Dryer:Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;

Carbonization stove:If you want to make wood charcoal , you can use our carbonization stove .

3. working principle of wood chipper machine

The wedge adjustment block is filled into the bottom of the blade to adjust its shape.The rear blade is an adjustable pad for adjusting the compensation length of the worn blade. Interconnecting chip gaps on the other side of the blade are evenly distributed outside the disc, generating air to blow out the wood chips. After screening, put the big wood into the wood crusher a second time. The pieces of wood are of the same length.