Automatic Potato Chips Deoiling Machine

Description:

ing principle
The deoiler is a device that uses the principle of mechanical centrifugation to remove the oil by high-speed rotation of the inner cylinder and collect it.The equipment adopts the deoiling cylinder to rotate at a low speed, and the upper part is uniformly fed, so that the object is evenly loaded into the degreasing cylinder, and then automatically controlled by the frequency converter, the deoiling cylinder runs at a low speed, and gradually increases the speed to the working speed, and the object with the oil is High-speed centrifugation, separating the object from the oil through the wall of the porous deoiling cylinder, the separated oil is smashed to the inner wall of the outer cylinder, and then discharged from the oil outlet to the oil pan to complete the deoiling process of the object, the body Suspended on a vibration damping device consisting of four sets of compression springs.

2.Attributes:

Food deoiler.

Characteristics:

1, shock safety. The clutch is activated, accelerating easily and extending the life of the motor.

2, precise measurement, smooth operation, speed can be selected according to deoiling, in line with the centrifugal effect. Free use of cement machine and pit, can be used with peace of mind.

Configuration:

1, slow start device

2, time automatic control

3, constant temperature automatic control

Product information:

Use and maintenance

1. Regularly check whether the bolts in all parts of the equipment are loose, and regularly add grease, pay attention to the tension of the belt;

2. The equipment shall not be fed in a static state. It is forbidden to carry out various inspections in the power-on state. If there is any abnormality, the equipment should be completely stopped before the inspection and maintenance can be carried out;

3. The equipment should be uniformly fed at low speed (2-3 rpm) to ensure the balance of objects in the deoiling cylinder;

4. For hydraulic system oil, use a viscosity of 15-68 CST to clean non-impurity hydraulic oil. It is recommended to use N46 hydraulic oil;

5. After the first 100 hours of system use, the hydraulic oil should be replaced and the hydraulic oil should be replaced every 3000 hours.

6. Do not stack other debris around the equipment, keep it clean and have sufficient lighting.