China Manufacturers Biomass Energy Fuel Wood Pellet Briquette Making Machine 

What is the material to use for the biomass pellet machine?

Biomass fuel is made from solid waste such as corn stalks, wheat straw, straw, peanut hulls, corn cobs, cotton stalks, soybean stalks, chaff, weeds, branches, leaves, sawdust, and bark. Pressurized, densified, and formed into a small rod-shaped solid particulate fuel. The pellet fuel is produced by pressing a raw material such as wood chips and straws by a press roll and a ring die under normal temperature conditions. The density of raw materials is generally about 110-130kg/m3, and the density of particles after molding is more than 1100kg/m3. It is very convenient to transport and store, and its combustion performance is greatly improved.

What is the process?

The process flow is raw material collection → raw material pulverization → raw material drying → granulation molding → bagging sales. According to the harvest period of the crops, the raw materials should be stored in large quantities in time, followed by pulverization and molding. When molding, be careful not to pack the bag immediately. The principle of heat rise and contraction is to be cooled for 40 minutes, and then bagged for transportation.

What is the characteristic?

Characteristics of wood pellet fuel The pellet fuel after molding is large in size, small in volume, resistant to burning, and easy to store and transport. The volume after molding is 1/30~40 of the volume of the raw material, the specific gravity is 10~15 times of the raw material (density: 0.8-1.4), the calorific value can reach 3400~6000 kcal, and it is the solid fuel of high volatile phenol.

What is the application?

The use of biomass pellet machine The pellet fuel after straw molding is a new type of bioenergy. It can replace wood, raw coal, fuel oil, liquefied gas, etc. It is widely used in heating, life stoves, hot water boilers, industrial boilers, raw Material power plant, etc.

 Technical information:

What questions to confirm before making quotation?

1,What material do you want to use?

2,What capacity do you want to produce?

3,What shape do you want to make?