New Arrival, buy Factory direct sale High speed Walnut shell breaking machine on China Suppliers Mobile

Product Details

Working principle

The working principle of:

The equipment is driven by electric motor, plate extrusion type walnut shell breaker.By adjusting the gap between the active and passive shell plates with the automatic buffer device, different kinds and sizes of nuts can be cracked.It is safe, reliable and convenient to use, especially suitable for walnut growers and walnut processing enterprises. Feature: The design takes into account the factors of energy saving, environmental protection, high efficiency, good quality, etc., to meet the advanced agricultural machinery has the characteristics of "high efficiency, high quality, low consumption, safety, sanitation, environmental protection" and so on.

Product description:

(1) to be processed walnut sorting requirements are not high, can be processed after the preliminary screening of the walnut;Adopt the principle of mechanical eccentric shaft flat plate extrusion shell;Adapted to different varieties of walnuts. (2) The production efficiency is nearly 20 times higher than the manpower, the rate of breaking the shell ≥99.9%, the rate of breaking and unbreaking is less than or equal to 0.1%; (3) The whole food processing process adopts the mechanized production mode, which reduces the possibility of workers directly touching the processed food raw materials, avoids the secondary pollution in the processing process, and improves the food hygiene index.

Product Feature

Product feature:

1, in order to prevent the crushing of walnuts, before breaking the shell through the humidification treatment, first soaked in cold water with chlorine for 8 to 72 hours, then put the walnut in a bag, VAT or basin to drain and seal for 16 to 24 hours, and then ready to break the shell (in the next 24 hours). 2, the principle of the breaking machine is at both ends of the walnut pressure, according to the different types of walnut, walnut placement can be appropriately adjusted.

Product advantages:

Product advantage:

1. The installation of circuit and wire shall comply with the safety electricity regulations. The power supply must be equipped with leakage protection switch.The wires should not be wrapped around the rack. The switch should be installed near the machine to facilitate the switch. The machine should be grounded reliably. 2. After the machine is started, no one is allowed to touch the rotating part with his hands in case of accidents. 3, children and minors are not allowed to approach the machine, but not to operate the machine, not familiar with the machine is not allowed to operate the machine. 4. All maintenance, inspection, etc., shall be carried out under the premise of power shutdown. It is strictly prohibited to open or remove the protective cover during work.

Manufacturing Technique

Model	power	voltage	Capacity	size
RX-10	1.5KW	220/380v	200-300kg/h	13007001300mm
RX-20	1.5KW	220/380v	300-450kg/h	13008001500mm
RX-30	3KW	220/380v	500-700kg/h	18009501650mm

About Us