Customized Best Price On Grid Solar Hybrid Charge Controller 400w Horizontal Wind Power Turbine
Negotiable
Min.Order:1
Elege Electronic Technology (Zhangjiagang) Co., Ltd.
◎ Safety The vertical blade is adopted, and the main stress point is concentrated on the hub, so the problems of blade falling off, fracture and blade flying out have been better solved. ◎ Noise Horizontal plane rotation and blade design based on the principle of aircraft wing are adopted to reduce the noise to a level that can not be measured in the natural environment. ◎ Wind resistance The principle of horizontal rotation and vertical flat blade makes it less subject to wind pressure and can resist super typhoon. ◎ Turning radius Because of its different design structure and operation principle, it has smaller turning radius than other forms of wind power generation, saves space and improves efficiency. ◎ Generation curve characteristics The start-up wind speed is lower than that of other types of wind turbines, and the rising range of power generation is relatively gentle. Therefore, within the wind speed range of 5 ~ 8m, its power generation is 10% ~ 30% higher than that of other types of wind turbines. ◎ Utilization wind speed range The special control principle is adopted to expand its suitable operating wind speed range to 2.5 ~ 25m / s, maximize the use of wind resources, obtain greater total power generation, and improve the economy of wind power equipment. ◎ Braking device The blade itself has speed protection and is also equipped with electromagnetic brake. | ||||||||
Model | elege-H1-400W | Number of blades | 3 pieces/5 pieces | ||
Rated power | 400W | Blades material | aluminum alloy | ||
Max power | 2.5KW | Body material | 8A3 carbon steel | ||
Rated voltage | 48V/96V | Generator | three phase AC permanent magnet generator/maglev generator | ||
Start-up wind speed | 2.5m/s | Control System | electromagnetic brake | ||
Rated wind speed | 12m/s | Yaw Mode | automatic windward angle | ||
Survival wind speed | 40m/s | Lubrication mode | self lubrication | ||
Wind wheel diameter | 1.16 m | Tower form | guyed tower/independent tower | ||
Blade Height | 1.8 m | Working temperature | -40℃-80℃ |