FD2.8-2kw fixed pitch wind turbine: US$530.00/set
FD3.2-2kw fixed pitch wind turbine: US$600.00/set
FD3.2-2kw variable pitch wind turbine: US$1350.00/set
FD3.8-2kw variable pitch wind turbine: US$2200.00/set
Advantages :
- Blades rotor: Blades rotor efficiency can reach 0.42. Noise level is less than 65db, and balance adjustment has been carried out strictly before leaving factory.
- Generator: Blades rotor drives directly. Lower rotation speed, PMG synchronous generator, over load capacity is 150%.
- Pitch controlled wind turbine: Adopt stable pitch controlled system, can be used in variable environments
- Low failure rate
- Speed regulates Performance: The precision of pitch controlled system is 10 r/min, and never over speed at gale. Low Start up Wind Speed: According to different wind conditions, adjust the blade initial angle to make wind turbine start up at low wind speed.
- The start-up wind speed is ≤3m/s.
- Manual brake: Reliable braking system, easy to operate, can stop wind turbine at any time.
- Automatically undo cable: slip rings undo the cable automatically. Ensure the cable has not twist. Double carbon brushes structure make sure power transfer without failure.
- Well-adapted Wind turbine: The operation wind speed is 3-30m/s.
Specification :
Blades rotor Diameter (m) |
3.8 |
Material and number of the blades |
FRB 3 PCS |
Rated power / max power (w) |
2k/3k |
Rated wind speed (m/s) |
9 |
Startup wind speed (m/s) |
3 |
Working wind speed (m/s) |
3-25 |
Start up torque(N.m) |
1.4 |
Survived wind speed (m/s) |
40 |
Rated rotation speed (r/min) |
380 |
Working Voltage (V) |
DC24--300v |
Generator style |
3 phase ,AC PMG |
Speed regulation method |
centrifugal pitch control, yaw |
Stop method |
Brake by hand drag + electromagnet brake |
Working system |
Off-grid working system/ |
Guy wire tower Height |
8m,9m,10m,12m,15m |
Tilting up Tower height |
8m,9m,10m,12m,15m |
wind turbine output power curve:
Other variable pitch wind turbine models:
Pitch Control Wind Turbine Technical Parameters | |||||||
Item | FD3.8-2kw | FD4-3kw | FD5.4-5kw | FD10-10kw | FD12-20kw | FD14-30kw | FD23-50kw |
Rotor diameter(m) | 3.8 | 4 | 5.4 | 10 | 12 | 14 | 23 |
Blade material | Reinforced FPR |
Reinforced FPR |
Reinforced FPR |
||||
Blade quantity | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Rated wind speed (m/s) | 9 | 10 | 10 | 10 | 10 | 9 | 9 |
Start-up wind speed(m/s) | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Working wind speed(m/s) | 3.0-25 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 |
Security wind speed(m/s) | 40 | 40 | 45 | 45 | 50 | 50 | 50 |
Starting torque(n/m) | 1.4 | 2.5 | 4.5 | 7.5 | 14 | 20 | 110 |
Speed adjusting mode | Centrifugal Pitch Control |
Active Pitch Control, Active Yawing |
|||||
Stop method | Electromagnetic + Manual brake |
Feathering,Yawing, Electromagnetic |
|||||
Generator type | Permanent Magnet Three phase AC generator | ||||||
Rated power | 2KW | 3KW | 5KW | 10KW | 20KW | 30KW | 50KW |
Maximum power | 3KW | 4KW | 6KW | 12KW | 25KW | 35KW | 60KW |
Rated RPM(r/min) | 380 | 300 | 240 | 180 | 150 | 140 | 60 |
Working voltage | DC24V-500V | DC48V-500V | DC48V-500V |
DC120V -500V |
DC240V-500V | DC500V | DC700V |
Wind turbine weight(kg) | 130 | 160 | 260 | 1000 | 2500 | 2800 | 6580 |
Wind turbine main body assembly : 400w camping wind generator
Perfect design :
Working system:
Wind (solar hybrid) on grid system
Wind (solar hybrid) off grid working system
Home and Abroad Applications:
System Relaed Products :
2kw PWM charge controller with dump load:
Type |
2KW-120Vdc |
2KW-220Vdc |
Wind turbine rated power |
2KW |
2KW |
Wind turbine max. power |
4KW |
4KW |
Solar panel |
600Wp |
600Wp |
Battery |
120Vdc |
220Vdc |
Function |
Rectifier,charge, control |
|
Display mode |
LCD |
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
|
PWM constant pressure voltage |
>140Vdc |
>250Vdc |
3-phase load voltage of the wind turbine |
150±2Vdc |
260±2Vdc |
Recovery charging voltage of the wind turbine |
138±2Vdc |
240±2Vdc |
Solar stop charge voltage |
150±2Vdc |
260±2Vdc |
Solar recovery charging voltage |
<140Vdc |
<250Vdc |
Low-voltage of the battery |
100±2Vdc |
180±2Vdc |
Self-provided connecting wire of the battery |
>4mm² |
>2.5mm² |
PWM fuse |
25A |
10A |
Solar fuse |
10A |
10A |
Charging fuse |
32A |
16A |
Work environment temperature |
-30-60°C |
|
Relative humidity |
<90% No condensation |
|
Noise (1m) |
<40dB |
|
Degree of protection |
IP20(Indoor) |
|
Cooling method |
Forced air cooling |
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
|
Size of the controller (mm) |
480*360*230 |
480*360*230 |
Weight of the controller |
16 Kg |
16 Kg |
Size of the load (mm) |
490*460*310 |
490*460*310 |
Weight of the load |
15.5 Kg |
15.5 Kg |
2kw PWM on grid controller with dump load:
Power of the equipped wind turbine (W) |
2K |
Operating mode |
Continuous |
Function |
Commutation, control |
Operating environment |
Temperature -30~60℃, humidity≤80% |
PWM unloading voltage (DCV) |
≥350V |
brake voltage (DCV) |
380±5V |
brake delay time (min) |
10-20 minutes |
Low voltage indicator (V) |
≤130V |
Self-provided connecting wire of the brake (mm²) |
>2.5mm² |
Self-provided connecting wire of the PWM dump load(mm²) |
>2.5mm² |
PWM unloading fuse (A) |
10A |
DC output fuse (A) |
10A |
Packing and Shipping :
Item# | Product description | Spec | Unit | Q'ty | Remark |
1 | main body | FD3.8-2kw48v | set | 1 | |
inside hexagonal bolt | M12*30 | pcs | 9 | ||
flat washer | φ12 | pcs | 9 | ||
inside hexagonal bolt | M12*40 | pcs | 9 | ||
flat washer | φ12 | pcs | 9 | ||
hammer assembly | 2kw Pitch control | set | 3 | ||
inside hexagonal bolt | M10*35 | pcs | 8 | ||
2 | blades | 2kw Pitch control L=1.85m | pcs | 3 | |
3 | FRB tail | 2kw Pitch control | set | 1 | |
4 | manual brake | 2kw Pitch control | pcs | 1 | |
5 | Pitch Control WTG blades | FD3.8 | pcs | 3 | |
6 | Aluminum casting stator | 2kw 48v | pcs | 1 | |
7 | Pitch Control WTG blades | FD3.8 | pcs | 3 | |
8 | Protection film | FD3.8 | pcs | 6 |
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
1kw, 2kw, 3kw, 5kw Vertical axis wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
Thanks!
Our Certificates and wind turbine test report :
Our Factory :
1. Wind tubine model selection
Pls check your local place average wind speed,then we will provide recommend model for you.
Low average wind speed place can select larger bldes rotor, higher tower, higher voltage wind turbine;
Rich wind place can select normal blades rotor diameter. Speed limited system.
2. Working system
If you local place has grid power, you can select:
off grid system +grid power hybrid system; Wind solar off grid sysem + grid power hybid system;
On grid system;
If there is no grid power, you can select wnd tubine off grid system + backup power hybid ystem;
Wind solar off grid system + backup power hybrid system.
3. Tower selection:
The blades rotor bottom tip should be higher than max surrounding barrier.
For more details, pls contact with us.
Contact me :
24 hours contact with us via: